喷丸处理可以改善机械零件的疲劳强度、耐磨性和粗糙度等性能,其应用也越来越广泛,随着技术要求的提高,新型喷丸处理技术得到了发展.综述了国内外传统喷丸处理技术的研究及发展现状,阐述了新型喷丸处理技术的特点和使用条件,分析了喷丸强化处理技术在实际应用中的限制条件,指出今后的研究重点应为开发复合喷丸强化技术、开拓新的应用方向及加强理论研究.
参考文献
| [1] | 高玉魁.喷丸强化对TC4钛合金组织结构的影响[J].稀有金属材料与工程,2010(09):1536-1539. |
| [2] | 高玉魁.表面强化对0Cr13Ni8Mo2Al不锈钢连接螺栓疲劳寿命的影响[C].第六届全国表面工程学术会议暨首届青年表面工程学术论坛论文集,2006:1040-1043. |
| [3] | 高玉魁.304奥氏体不锈钢喷丸引起的组织转变和两相残余应力测定[J].航空材料学报,2004(04):18-21. |
| [4] | 高玉魁.喷丸对Ti-10V-2Fe-3Al钛合金拉-拉疲劳性能的影响[J].中国有色金属学报,2004(01):60-63. |
| [5] | 高玉魁.喷丸对TC18钛合金拉-拉疲劳性能的影响[J].稀有金属材料与工程,2004(09):1000-1002. |
| [6] | 高玉魁.喷丸强化对TC21高强度钛合金疲劳性能的影响[J].金属热处理,2010(08):30-32. |
| [7] | 李淑明,刘贤锋,胡永会.7075铝合金表面喷丸残余应力松弛的实验研究[J].热加工工艺,2013(14):27-30,33. |
| [8] | 赵艳丽,王强,杨庆祥,高玉魁.喷丸工艺参数对A-100高强度钢残余应力场的影响[J].金属热处理,2013(08):10-14. |
| [9] | 张新华.TC4钛合金喷丸强化表面性能对比研究[J].航空制造技术,2013(16):154-156,159. |
| [10] | 卢国鑫,宋颖刚,王仁智,王强,王欣.300M钢喷丸强化残余应力场的数值模拟[J].中国表面工程,2013(04):72-76. |
| [11] | 李雁淮,王飞,吕坚,徐可为.单丸粒喷丸模型和多丸粒喷丸模型的有限元模拟[J].西安交通大学学报,2007(03):348-352. |
| [12] | 李源,雷丽萍,曾攀.弹丸束喷丸有限元模型数值模拟及试验研究[J].机械工程学报,2011(22):43-48. |
| [13] | 刘文才 .ZK60和GW103K镁合金高周疲劳行为及其喷丸强化研究[D].上海交通大学,2011. |
| [14] | 王开阳;薛雯娟;刘林森 等.一种制备纳米表面涂层的方法[P].中国,201310444695.8,2013-09-24. |
| [15] | M.P. Nascimento;R.C. Souza;W.L. Pigatin .Effects of surface treatments on the fatigue strength of AISI 4340 aeronautical steel[J].International Journal of Fatigue,2001(7):607-618. |
| [16] | Girish D V;Mayuram M M;Krishnamurthy S .Influence of shot peening on the surface durability of thermomechanically treated En24 steel spur gears[J].Tribology International,1997,30(12):865-870. |
| [17] | Mylonas, G.I.;Labeas, G. .Numerical modelling of shot peening process and corresponding products: Residual stress, surface roughness and cold work prediction[J].Surface & Coatings Technology,2011(19):4480-4494. |
| [18] | Jinxiang Liu.Numerical analysis for effects of shot peening on fatigue crack growth[J].International Journal of Fatigue,2013:101-108. |
| [19] | Nouguier-Lehon C;Zarwel M;Diviani C et al.Surface impact analysis in shot peening process[J].WEAR,2013,302(1/2):1058-1062. |
| [20] | 张继旺,鲁连涛,张卫华.微粒子喷丸中碳钢疲劳性能分析[J].金属学报,2009(11):1378-1383. |
| [21] | Hackel L;Harris F .Contour forming of metals by laser pee-ning[P].US,6410884,2002-06-25. |
| [22] | 钟蜀晖,韩同伟.表面纳米化对GH4049镍基高温合金性能的影响[J].表面技术,2006(01):33-35. |
| [23] | Yoshikazu Todaka;Minoru Umemoto;Koichi Tsuchiya .Comparison of Nanocrystalline Surface Layer in Steels Formed by Air Blast and Ultrasonic Shot Peening[J].Materials transactions,2004(2):376-379. |
| [24] | 张新华,曾元松,王东坡,王婷.超声喷丸强化7075-T651铝合金表面性能研究[J].航空制造技术,2008(13):78-80,90. |
| [25] | Mordyuk BN;Prokopenko GI .Ultrasonic impact peening for the surface properties' management[J].Journal of Sound and Vibration,2007(3/5):855-866. |
| [26] | Soyama H .Improvement of fatigue strength by using cavitating jets in air and water[J].Journal of Materials Science,2007(16):6638-6641. |
| [27] | Hitoshi SOYAMA;Kei SASAKI;Dan ODHIAMBO;Masumi SAKA .Cavitation Shotless Peening for Surface Modification of Alloy Tool Steel[J].JSME International Journal, Series A. Solid mechanics and material engineering,2003(3):398-402. |
| [28] | 曾元松,黄遐,李志强.先进喷丸成形技术及其应用与发展[J].塑性工程学报,2006(03):23-29,39. |
| [29] | H.Soyama;J.D.Park .Use of Cavitating Jet for Introducing Compressive Residual Stress[J].Journal of manufacturing science and engineering,2000(1):83-89. |
| [30] | 周建忠;罗开玉;蒋素琴 等.一种激光熔覆结合激光喷丸强化表面改性的方法和装置[P].中国,CN200810155785,2008-10-15. |
| [31] | 王欣,高玉魁,王强,宋颖刚,陆峰.再次喷丸周期对TC18钛合金疲劳寿命的影响[J].材料工程,2012(02):67-71. |
| [32] | 戴如勇,于中奇,刘忠伟,唐亮,詹科,姜传海.渗碳淬火18CrNiMo7-6钢的表面喷丸强化及表征[J].机械工程材料,2013(05):100-102. |
| [33] | 王仁智.金属材料表面喷丸应变层内组织结构的研究[J].航空材料学报,1981(01):30. |
| [34] | Gray H;Wagner L;Lutjering G.Influence of residual stres-ses on fatigue crack propagation of small surface cracks[J].Residual Stresses in Science and Technology,1986(02):815-822. |
| [35] | Cao W;Fathallah R;Castex L .Correlation of almen arc height with residual stresses in shot peening process[J].Materials Science and Technology,1995,11(09):967-973. |
| [36] | 凌祥,彭薇薇,倪红芳.喷丸三维残余应力场的有限元模拟[J].机械工程学报,2006(08):182-189. |
| [37] | M. Guagliano .Relating Almen intensity to residual stresses induced by shot peening: a numerical approach[J].Journal of Materials Processing Technology,2001(3):277-286. |
| [38] | M. Guagliano;L. Vergani .An approach for prediction of fatigue strength of shot peened components[J].Engineering Fracture Mechanics,2004(4/6):501-512. |
| [39] | M. Meo .Finite element analysis of residual stress induced by shot peening process[J].Advances in engineering software,2003(9):569-575. |
| [40] | S.A. Meguid;G. Shagal;J.C. Stranart .Three-dimensional dynamic finite element analysis of shot-peening induced residual stresses[J].Finite elements in analysis & design,1999(3):179-191. |
| [41] | 吴钢,侯占忠.提高水力机械抗磨蚀性能的喷丸工艺数值分析[J].水电能源科学,2006(01):1-3. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%