采用沿经向切片积分的方法计算2.5维机织复合材料的宏观经向拉伸弹性模量,与试验结果和传统的体积平均合成方法进行了对比,分析表明,本文中的方法能够有效提高传统体积平均法的预测精度.利用文中的方法分析了2.5维机织复合材料沿在机织循环过程中的经向拉伸弹性模量分布情况,并且对相关机织结构的2.5维机织复合材料进行了试验研究.研究发现,经纱弯曲程度较小的直联结构和添加平直经纱的衬经结构能够有效提高2.5维机织复合材料的经向拉伸弹性模量,并且能够改善经向拉伸应力-应变曲线的非线性.
参考文献
| [1] | Yang J M,Ma C L,Chou T W.Fiber inclination model of three-dimensional textile structural composites[J].Journal of Composite Materials,1986,20(9):472-484. |
| [2] | Whiteney T J,Chou T W.Modeling of 3 D angle-interlock textile structural composites[J].Journal of Composite Material,1989,23:890-911. |
| [3] | Craig R C.A simplified discrete-tow model for modeling stiffness and failure within woven composites[D].USA:Michigan State University,2002. |
| [4] | 丁辛,易洪雷.三维机织结构的几何模型[J].复合材料学报,2003,20(5):108-113.Ding Xin,Yi Honglei.A geometric model of three dimensional woven structures[J].Acta Materiae Compositae Sinica,2003,20(5):108-113. |
| [5] | 杨连贺.3-D机织复合材料弹性性能研究[J].天津纺织工学院学报,1998,17(4):41-48.Yang Lianhe.Study on elastic properties for 3-D woven composites[J].Journal of Tianjin Polytechnic University,1998,17(4):41-48. |
| [6] | 燕瑛,成传贤.基于细观结构的三维机织复合材料弹性性能分析[J].航空学报,1999,20(4):289-294.Yan Ying,Cheng Chuanxian.Analysis of elastic property for 3-D woven composites based on fabric microstructure[J].Acta Aeronautica et Astronautica Siniea,1999,20(4):289-294. |
| [7] | 郑君,温卫东,崔海涛.2.5维机织结构复合材料的几何模型[J].复合材料学报,2008,25(2):143-148.Zheng Jun,Wen Weidong,Cui Haitao.Geometric model of 2.5 dimensional woven strucures[J].Acta Materiae Compositae Sinica,2008,25(2):143-148. |
| [8] | 高建辉.三维机织复合材料结构振动分析技术研究[D].南京:南京航空航天大学,2006.Gao Jianhui.Vibration characteristic analysis technology of 3-D woven composite structure[D].Nanjing..Nanjing University of Aeronautics and Astronautics,2006. |
| [9] | 郑 君.2.5维机织复合材料刚度预测及失效准则研究[D].南京:南京航空航天大学,2009.Zheng Jun.Research on elastic property prediction and failure criteria of 2.5D woven composites[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2009. |
| [10] | 董伟峰.2.5D编织复合材料力学性能即损伤机理的有限元研究[D].南京:南京航空航天大学,2007.Dong Weifeng.Finite element analysis of the mechanical property and damage mechanism of 2.5D woven composites[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2007. |
| [11] | 董伟锋,肖 军,李勇.2.5维编织复合材料弹性性能的理论研究[J].南京航空航天大学学报,2005,37(5):659-663.Dong Weifeng,Xiao Jun,Li Yong.Theoretical study on elastic properties of 2.5D braided composites[J].Journal of Nanjing University of Aeronautics & Astronautics,2005,37(5):659-663. |
| [12] | 周储伟,喻溅鉴,周光明.三维机织复合材料的一种梁单元细观力学模型[J].复合材料学报,2004,21(6):155-160.Zhou Chuwei,Yu Jianjian,Zhou Guangmin.Micro beam model for 3D woven composite materials[J].Acta Materiae Compositae Sinica,2004,21(6):155-160. |
| [13] | Zhou C W.Micro mechanical model of 3D woven composites[J].Chinese Journal of Aeronautics,2005,18(1):40-46. |
| [14] | Cox B N,Carter W C,Fleck N A.A binary model of textile composite Ⅰ:Formulation[J].Acta Metallurgica et Materialia,1994,42(10):3463-3479. |
| [15] | Xu J,Cox B N,McGlockton M A.A binary model of textile composite Ⅱ:The elastic regime[J].Acta Metallurgica et Materialia,1995,43(9):3511-3524. |
| [16] | Mcglockton M A,Cox B N,Mcmeeking R M.A binary model of textile composites Ⅲ:High failure strain and work of fracture in 3D weaves[J].Journal of the Mechaincs and Physics of Solids,2003,51:1573-1600. |
| [17] | 王新峰.机织复合材料多尺度渐进损伤研究[D].南京:南京航空航天大学,2007.Wang Xinfeng.Research on the multi-scale accumulative damage of woven composites[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2007. |
| [18] | 孔春元,孙志刚,高希光.2.5维C/SiC复合材料经向拉伸性能[J].复合材料学报,2012,29(2):192-198.Kong Chunyuan,Sun Zhigang,Gao Xiguang.Tensile property of 2.5D C/SiC composites in warp direction[J].Acta Materiae Compositae Sinica,2012,29(2):192-198. |
| [19] | 孔春元,孙志刚,高希光.2.5维C/SiC复合材料单胞模型及刚度预测[J].航空动力学报,2011,26(11):2459-2467.Kong Chuyuan,Sun Zhigang,Gao Xiguang.Unit cell of 2.5 dimension C/SiC and its stiffness prediction[J].Journal of Aerospace Power,2011,26(11):2459-2467. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%