用Gleeble-3800试验机对一种低碳CrNi3Si2MoV钢开展了热压缩30％后立即进行淬火配分(Q&P)工艺处理的试验,探讨变形温度对淬火配分钢微观组织和硬度的影响,用SEM和TEM进行微观组织表征,用XRD测量残留奥氏体体积分数.结果表明,与Q&P工艺处理的样品相比,变形后再进行Q&P工艺处理的样品存在残奥量和维氏硬度同时升高的现象,随变形温度的降低,钢的硬度逐渐升高,残奥量先增大后减小,热变形导致钢的Ms温度升高,变形温度为750℃的样品获得最大量的残留奥氏体,达到17.2％,热变形引入的位错促进C的配分,同时提高钢的强度.
参考文献
| [1] | Matlock D K;Br(a) utigam V E;Speer J G .Application of the quenching and partitioning (Q&P) process to a medium-carbon high Si microalloyed bar steel[J].Materials Science Forum,2003,426-432(02):1089-1095. |
| [2] | 王存宇 .30GPa％级超高强度马奥组织钢的研究[D].钢铁研究总院,2010. |
| [3] | Streicher A M;Speer J G;Matlock D K.Quenching and partitioning response of a Si-added TRIP sheet steel[A].USA:Warrendale,PA:AIST,2004:51-55. |
| [4] | Rizzo F;Martins A R;Speer J G .Quenching and partitioning of Ni-added high strength steel[J].Materials Science Forum,2007,4476:539-543. |
| [5] | Zhong N;Wang X D;Huang B X.Microstructures and mechanical property of quenched and partitioned Fe-C-Mn-Si steel[A].Korea,2006:885-891. |
| [6] | DeCooman B C;Speer J G.Microstructure-properties relationships in quench and partition (Q&P) steel,implications for automotive anti-instrusion applications[A].Korea,2006:798-804. |
| [7] | 解西强,高文涛,时捷,王存宇,张方.Q&P（淬火和分配）工艺对25Si2Ni3钢组织和力学性能的影响[J].特殊钢,2008(05):56-58. |
| [8] | Mullner P;solenthaler C .On the effect of deformation twinning on defect densities[J].Materials Science and Engineering A,1997,230(1-2):107-115. |
| [9] | Masek Bohuslav;Jirkova Hana;Hauserova Daniela;cKucerova Ludmila;Klauberova Danuse.The Effect of Mn and Si on the Properties of Advanced High Strength Steels Processed by Quenching and Partitioning[J].Materials Science Forum,2010:94-97. |
| [10] | John G Speer,David K Matiock.Q&P钢热处理工艺的开发进展[J].世界钢铁,2009(01):31-35,39. |
| [11] | Mahesh C. Somani;L. Pentti Karjalainen;David A. Porter .Evaluation of the Behaviour and Properties of a High-Si Steel Processed Using Direct Quenching and Partitioning[J].Materials Science Forum,2012(Pt.4):2824-2829. |
| [12] | Shu ZHOU;Ke ZHANG;Nailu CHEN .Investigation on High Strength Hot-rolled Plates by Quenching-partitioning-tempering Process Suitable for Engineering[J].ISIJ International,2011(10):1688-1695. |
| [13] | Thomas G A;Speer J G;Matlock D K .Quenched and partitioned microstructures produced via Gleeb simulations of hot-strip mill cooling practices[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2011,42(12):3652-3659. |
| [14] | 王存宇,时捷,曹文全,惠卫军,王毛球,董瀚.Q&P工艺处理低碳CrNi3Si2MoV钢中马氏体的研究[J].金属学报,2011(06):720-726. |
| [15] | 束德林.金属力学性能[M].北京:机械工业出版社,1987 |
| [16] | 王存宇,时捷,曹文全,董瀚.Q&P工艺处理钢的单轴拉伸性能研究[J].材料热处理学报,2010(06):77-83. |
| [17] | Guimaraes J R C;Shyne J C .On the effect of plastic deformation on thermal stabilization of austenite in an Fe-Ni-C alloy[J].Metallurgical and Materials Transactions,1973,2(08):2063-2065. |
| [18] | 陈国安,杨王玥,孙祖庆.中碳钢过冷奥氏体形变过程中的组织演变[J].金属学报,2007(01):27-34. |
| [19] | 徐祖耀.马氏体相变与马氏体,第2版[M].北京:科学出版社,1999:690-699. |
| [20] | Kajiwara S .Roles of dislocations and grain boundaries in martensite nucleation[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1986,17(10):1693-1702. |
| [21] | Koistinen D P;Marburger R E .A general equation prescribing the extent of the austenite-martensite transformation in pure ironcarbon alloys and piain carbon steel[J].Acta Metallurgica,1959,7:59-63. |
| [22] | Gerdeman F L H;Speer J G;Matlock D K.Microstructure and hardness of 9260 steel heat-treated by the quenching and partitioning (Q&P) process[A].Wolfsburg,Germany,2004:439-449. |
| [23] | Maxwell P C;Goldberg A;Shyne J C .Stress-assisted and strain-induced martensites in Fe-Ni-C alloys[J].Metallurgical and Materials Transactions,1974,5(06):1305-1138. |
| [24] | Justusson W M;Schmatz D J .Some observations on the strength of martensite formed from cold-worked austenite[J].Trans Am Soc Metals,1962,55:640-644. |
| [25] | 雷廷权;姚忠凯;杨德庄.钢的形变热处理[M].北京:机械工业出版社,1979:106-110. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%