<正> 在备有拉伸台的S-550扫描电镜下直接观察了铁素体加马氏体双相钢拉伸变形的全过程,分析了马氏体含量,马氏体含碳量,铁素体性能等因素对两相变形特别是屈服行为的影响。材料及试验方法 试验用料为国产10号(C
Microscopic deformation behavior in some dual-phase steels consisting of ferrite and martensite has been observed continuously by using a scanning electron microscope with tension stand, and the strain values of two phases have been measured with graphanalyse technique. The results show that the distribution of strain between two phase and that in each phase are so nonuniform as to cause a strain gradient in front of martensite islands. The ratio of strain in martensite to that in ferrite increases with the increase of martensite content and tempering temperature as well as the decrease of carbon content in marteniste. The yield strength of dual phase steel with ferrite matrix is controlled by the ferrite.
参考文献
| [1] | |
| [2] | |
| [3] | |
| [4] | |
| [5] | |
| [6] | |
| [7] | |
| [8] | |
| [9] | |
| [10] | |
| [11] |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%