依据AASHTO规范设计AC-13沥青混凝土,选择两种具有代表性的温拌剂Advera和Sasobit.采用旋转压实剪切实验机(GTM)成型试件,从力学指标(剪应力)及做功改变试件空隙率两方面,探讨了沥青混合料的工作和易性.实验结果表明:温拌沥青混合料的工作和易性在适宜拌和压实温度范围内较热拌沥青混合料的好;推荐采用8％空隙率时的旋转压实次数作为沥青混合料工作和易性的评价指标.
参考文献
| [1] | Joe W Button .A synthesis of warm-mix asphalt[R].Texas:Texas Transportation Institute The Texas A&M University System College Station,2007. |
| [2] | John D Angelo;Eric Harm;John Bartoszek .Warm-mix asphalt:European practice[R].US Department of Transportation Federal Highway Administration,2008. |
| [3] | 秦永春,黄颂昌,徐剑,徐长奎,苏玉昆.温拌沥青混合料技术及最新研究[J].石油沥青,2006(04):18-21. |
| [4] | Randy C West.Mixing and compaction temperatures of asphalt binders in hot-mix asphalt[M].Washington:Transportation Research Board Washington,2010 |
| [5] | 侯曙光.热拌与温拌沥青混合料和易性试验[J].南京工业大学学报（自然科学版）,2011(05):36-39. |
| [6] | JTG F40-2004.公路沥青路面施工技术规范[S].北京:人民交通出版社,2004. |
| [7] | 王捷,贾渝.改性沥青混合料拌和与压实温度确定方法综述[J].公路,2002(12):99-103. |
| [8] | Hussain U Bahia et al.Field evaluation of wisconsin modified binder selection guidelines[R].Madison:University of Wisconsin Madison Modified Asphalt Research Center,2012. |
| [9] | 张争奇,李宁利,陈华鑫.改性沥青混合料拌和与压实温度确定方法[J].交通运输工程学报,2007(02):36-40. |
| [10] | You Zhanping;Shu Wei G-oh;Dai Qingli .Laboratory evaluation of warm mix asphalt[R].Holden:Michigan Technological University Department of Civil and Environmental Engineering,2011. |
| [11] | Graham C .Hurley evaluation of sasobit for use in warm mix asphalt[D].Alabama:Auburn University,2005. |
| [12] | 吴超凡,曾梦澜,王茂文,夏漾.添加Sasobit温拌沥青混合料的拌和与压实温度确定[J].湖南大学学报（自然科学版）,2010(08):1-5. |
| [13] | 吴学文,汤文.基于sasobit、sasowam的温拌沥青性能研究[J].武汉工业学院学报,2011(03):65-71. |
| [14] | Prowell B D;Hurley G C.Warm-mix asphalt:Best practices[M].US:National Asphalt Pavement Association,2011:46. |
| [15] | Martin A;Arambula E;Estakhri C .NCHRP 9-49:Perforrnance of WMA technologies:Stage 1 moisture susceptibility[R].Texas:Texas Transportation Institute,College Station,2011. |
| [16] | Santucci L .Warm mix asphalt hits the road[R].California:University of California Pavement Research Center,2010. |
| [17] | AASHTO Designation:M 323-12.Standard specification for superpave volumetric mix design[S].,2012. |
| [18] | Kandhal P S;Cooley L A J .The restricted zone in the superpave aggregate gradation specification[R].Washington,DC:National Academy Press,2001. |
| [19] | NHI Course # 131053 superpave fundamentals reference manual[M].US:Department of Transportation Federal Highway Administration,2000 |
| [20] | 郭秀华,尤丽华,张秋菊,陈祥林.旋转压实仪及旋转压实参数的研究[J].机械设计与制造,2006(12):38-40. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%