采用模拟HIsmelt的富氧顶吹熔融还原技术冶炼惠民高磷铁矿与勐桥钛铁矿配矿，在温度为1500K，碱度为1.3, 配碳比为1.0的条件下，恒温时间20min（在升温过程中，没有通入惰性气体），恒温过程中通入O2（流量250L/h、纯度为99%）10min。恒温时间结束后，调整氧气流量为5L/h，保持其氧化性气氛至冷却。研究了不同配矿比例对铁回收率、生铁中磷、硫含量以及磷、硫分配比的影响。研究结果表明，在惠民铁矿和勐桥精矿的比例为1∶1时，其冶炼结果比较理想：铁的回收率为95.1%，生铁中磷的质量分数约为0.32%，硫的质量分数为0054%，钛的质量分数为0.031%。
Huimin high-phosphorus iron ore and ilmenite from Yunnan province was smelted by oxygen enriched top-blown smelting reduction iron-making technology. Much more details, such as iron recovery rate, distribution ratio of phosphorus and sulfur were discussed. Iron recovery could reach 95% with phosphorus content about 0.32%, sulfur content 0.054% and titanium content 0.031% in pig iron produced, under the conditions of 20min holding time at 1500K, basicity R of 1.3, C/O mole ratio of 1.0 and oxygen enriched flow rate of 250L/h and ore blending ratio of 1∶1. Oxidizing potential of top-space of SRV and slag combination can create the driving force to partition phosphorous and titanium to the slag, which ensure the success of the experiment.
参考文献
| [1] | |
| [2] |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%