欢迎登录材料期刊网

材料期刊网

高级检索

参考文献建立了FeMnC合金层错能的热力学模型,用模型计算了铝、铜、铬元素对Fe21Mn04C合金层错能的影响规律;在Fe21Mn04C合金中添加合金元素,研究其对层错能的影响。研究结果表明:铝和铜增加合金的层错能,而铬则降低合金的层错能;当层错能低于107mJ/m2时,Fe21Mn04C合金相组成为γ+ε,当层错能为10~1902mJ/m2时,合金的相组成为γ+ε+a,当层错能高于1902mJ/m2时,合金的相组成为单相的γ;层错能的变化和添加了合金元素铝、铜、铬的Fe21Mn04C合金性能变化没有相一致的关系,说明影响Fe21Mn04C合金力学性能的因素很多,需要进一步的研究。

Based on bibliographic data, the thermochemical model of stacking fault energy (SFE) in FeMnC system was presented. Using the model SFE of Fe21Mn04C with few percent of Aluminium, Copper and Chromium in addition was calculated. The SFE increases with the content of Aluminium and copper, contrary to chromium. The SFE of Fe21Mn04C alloy was effected by its phase composition: when the SFE is below 107mJ/m2, its phases are γ+ε, while the SFE is 10-1902mJ/m2, its phases are γ+ε+a, as long as the SFE is greater than 1902mJ/m2, it is full of austenite. The change of SFE of Fe21Mn04C with few percent of Aluminium, Copper and Chromium in addition is not accordance with mechanical properties changes, more factors effect mechanical properties of Fe21Mn04C alloys, furthermore study is needed.

参考文献

上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%