Bi layer formation in Cu/Sn-58Bi/Cu solder joints was investigated with different current densities and solder thickness. Uniform and continuous Bi layers were formed at the anode interface which indicated that Bi was the main diffusing species migrating from the cathode to the anode. The electromigration force and Joule heating took on the main driving forces for Bi diffusion and migration. In addition, two appearance types of Bi layers, planar-type and groove-type, were found during current stressing. The morphology and thickness of Bi layers were affected by current density and current stressing time.
参考文献
| [1] | C. Y. Liu;Chih Chen;C. N. Liao .Microstructure-electromigration correlation in a thin stripe of eutectic SnPb solder stressed between Cu electrodes[J].Applied physics letters,1999(1):58-60. |
| [2] | Z.G. Chen;Y.W. Shi;Z.D. Xia;Y.F. Yan .Study on the Microstructre of a Novel Lead-Free Solder Alloy SnAgCu-RE and Its Soldered Joints[J].Journal of Electronic Materials,2002(10):1122-1128. |
| [3] | J. W. Nah;K. W. Paik;J. O. Suh;K. N. Tu .Mechanism of electromigration-induced failure in the 97Pb-3Sn and 37Pb-63Sn composite solder joints[J].Journal of Applied Physics,2003(12):7560-7566. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%