Zn-Al-Mg合金镀层摩擦学性能影响其使用寿命,目前对其研究较少.在Q235钢表面热浸镀锌,制备出了Zn-0.5Al,Zn-0.5Al-1.0Mg和Zn-2.0Al-1.0Mg(质量分数)3种合金镀层.采用光学显微镜、维氏硬度计和摩擦磨损试验机分析了镀层的显微组织、硬度和摩擦性能.结果表明:Al和Mg可细化镀层晶粒,提高镀层硬度;在相同载荷和摩擦磨损试验周期下,Zn-Al-Mg镀层的磨痕窄于Zn-Al镀层的,Zn-Al镀层的跑合时间长于Zn-Al-Mg镀层的,增加Mg含量可减短镀层的跑合时间,增加Al含量可延长镀层跑合时间.
参考文献
| [1] | 贺志荣,何应,张永宏,刘继拓,解凯.热浸纯Zn和Zn-0.05Ni合金镀层组织性能的对比[J].材料热处理学报,2013(02):152-156. |
| [2] | 王成虎.微量元素对热浸镀锌波形梁钢护栏防腐层质量的影响[J].表面技术,2007(04):91-92. |
| [3] | Li, B.;Dong, A.;Zhu, G.;Chu, S.;Qian, H.;Hu, C.;Sun, B.;Wang, J. .Investigation of the corrosion behaviors of continuously hot-dip galvanizing Zn-Mg coating[J].Surface & Coatings Technology,2012(19/20):3989-3999. |
| [4] | 仲海峰,张启富,刘茹,程东妹,魏文龙.Zn-Al-Mg系热浸镀层钢板的研究进展[J].钢铁研究,2012(01):58-62. |
| [5] | 薛雷刚,印仁和,王卫江,郁祖湛.钢板上镀覆锌-镁合金及耐蚀机理的研究进展[J].电镀与精饰,2008(09):16-19,30. |
| [6] | Corrosion resistance of painted zinc alloy coated steels[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2009(10):2429. |
| [7] | Corrosion behaviour of Zn-Al-Mg coated steel sheet in sodium chloride-containing environment[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2009(10):2355. |
| [8] | 吕家舜,李锋,杨洪刚,康永林.热浸镀锌铝镁钢板镀层组织及腐蚀性能研究[J].材料工程,2012(10):89-93. |
| [9] | Dutta, M.;Halder, A.K.;Singh, S.B. .Morphology and properties of hot dip Zn-Mg and Zn-Mg-Al alloy coatings on steel sheet[J].Surface & Coatings Technology,2010(7):2578-2584. |
| [10] | E. De Bruycker;Z. Zermout;B.C. De Cooman .Zn-Al-Mg Coatings: Thermodynamic Analysis and Microstructure Related Properties[J].Materials Science Forum,2007(Pt.2):1276-1281. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%