采用电铸法制备镍药型罩,利用X射线衍射仪、扫描电镜研究电铸镍药型罩的微观组织,通过拉伸试验研究电铸镍药型罩的力学特性.结果表明:在无添加剂时,随着电流密度的增大,晶粒尺寸变大;加入添加剂后,晶粒细化,可得到超细晶镍药型罩.脉冲电铸制备的药型罩表面光滑,晶粒尺寸约为500 nm.电铸镍药型罩中存在强烈的<100>丝织构,电铸参数的改变对镍药型罩织构影响较小.力学特性研究表明其屈服强度为256 MPa,伸长率可达7.4%.断口形貌观察发现电铸超细晶镍的断裂属于延性断裂.
Nickel liners of shaped charges were prepared by electroforming. The microstructures of electroformed nickel liners of shaped charges were investigated using X?ray diffraction and scanning electron microscopy. The mechanical properties were researched by tensile test. The results show that grain size increases with current density increasing when no additives exist. Additives play an important role in obtaining ultra?fine grain of electroformed nickel. The grain size is about 500 nm. Strong <100> fibre texture exists in electroformed nickel,and electrolysis factors discussed above hasve no effect on texture formed in the electroformed nickel. The yield strength of electroformed nickel liners of shaped charges is about 256 MPa,and elongation is about 7.4%. The fracture surface of electroformed nickel shows a ductile fracture.
参考文献
| [1] | Gupta N K;Madhu V .Normal and oblique impact of energy projectile on mild steel plates[J].International Journal of Impact Engineering,1992,12(03):333-343. |
| [2] | Werner Goldsmith;Finnegan S A .Normal and oblique impact of cylindro-conical and cylindrical projectiles on metallic plates[J].International Journal of Impact Engineering,1986,4(02):83-105. |
| [3] | Zueco, J;Alhama, F .Inverse estimation of temperature dependent emissivity of solid metals[J].Journal of Quantitative Spectroscopy & Radiative Transfer,2006(1):73-86. |
| [4] | 王博,孙晓泉,王自荣.涂层光电隐身效果评估方法研究[J].量子电子学报,2004(04):538-541. |
| [5] | 王庭慰,程从亮,张其土.8～14μm波长低红外发射率涂料的研究[J].光学技术,2005(04):598-600. |
| [6] | 杜永,李梅,邢宏龙.热红外隐身涂料粘合剂的制备[J].山西化工,2006(06):1-3,7. |
| [7] | 费逸伟,黄之杰,唐卫红,李华强,朱富进.颜料对低发射率涂料红外辐射特性的影响[J].材料科学与工程,2002(03):449-452,440. |
| [8] | 徐飞凤,徐国跃,谭淑娟,陈砚朋,郭腾超,李泉灵,郭一辰.8～14μm波段低红外发射率与低光泽度兼容涂层的制备方法初探[J].兵器材料科学与工程,2011(04):5-9. |
| [9] | 裴亚利,樊新华,张忆,操应军,李宝德,郑连营.二氧化硅消光剂的特点及其在皮革上的应用[J].西部皮革,2009(19):15-19. |
| [10] | 张晓镭,张哲.皮革消光涂饰原理及消光剂的合成方法[J].中国皮革,2007(01):18-21. |
| [11] | 朱春雨,王惠玲,徐世增,马慧斌,宁延生,王凯.二氧化硅消光剂研究进展[J].无机盐工业,2005(06):14-17. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%