针对迁钢板坯角横裂形成的原因和影响因素等进行了系统的调查研究.结果表明脆性区弯曲矫直和外应力较大是产生角裂的根源,在此基础上采取了控制成分、保证铸机状态、二冷制度和锥度优化等相应的措施,使迁钢板坯的角裂发生率极大降低.
参考文献
[1] | 蔡开科.连铸坯表面裂纹的控制[J].鞍钢技术,2004(03):1-8. |
[2] | Hiroyuki Yasunaka;Kiminori Nakayama;Kiyoshi Ebina et al.Improvement of Transverse Corner Cracks in Continuously Cast Hypoperitectic Slabs[J].鉄 と 鋼,1995,81(09):894. |
[3] | MINTZ Barrie .The Influence of Composition on the Hot Ductility of Steels and to the Problem of Transverse Cracking[J].ISIJ International,1999,39(09):833. |
[4] | Tsail H T;Yin H;Lowry M.Analysis of Transverse Corner Cracks on Slabs and Countermeasures[J].AIS Tech,2005(02):201. |
[5] | HARADA Shinzo;TANAKA Shigenori;MISUMI Hideyuki et al.A Formation Mechanism of Transverse Cracks on CC Slab Surface[J].ISIJ International,1990,30(04):310. |
[6] | Toru KATO;Yoshiki ITO;Masayuki KAWAMOTO .Prevention of Slab Surface Transverse Cracking by Microstructure Control[J].ISIJ International,2003(11):1742-1750. |
[7] | Michel J P;Jonas J J.Precipitation Kinetics and Solute Strengthening in High Temperature Austenites Containing Al and N[J].ACTA METALLURGICA,1981(29):513. |
[8] | 刘阳春 .薄板坯连铸连轧流程氮、铝的控制及作用研究[D].北京:北京科技大学,2007. |
[9] | Machara Y;Yasumoto K;Sugitani Y.Effect of Carbon on Hot Ductility of As-cast Low Alloy Steels[J].Trans ISIJ Int,1985(25):1045. |
[10] | Mintz B;Yue S .Hot Ductility of Steels and Its Relationship to the Problem of Transverse Cracking During Continuous Casting[J].International Materials Reviews,1991,36(05):187. |
[11] | Nicolas Triolet;Kristof Poelmans;Pierre Mabelly et al.Prevention of Corner Cracks in Slab Continuous Casting[J].Revue de Métallurgie,2009,106(11):508. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%