利用Bc路径组织细化效率高、BA路径颗粒均匀再分散效果好的特点,设计了4BA+4Bc路径组合,考察了其相比于Bc、BA路径对Al-Mg2Si双相合金组织与力学性能的影响.结果表明,4BA+4Bc组合路径由于前期4道次BA路径挤压良好的颗粒再分散能力,促进了后续4道次Bc路径挤压材料的组织细化效率提高和大角度晶界的快速形成,材料的综合力学性能较其它两种路径得到显著改善.
参考文献
[1] | Prangnell P B;Barnes S J;Roberts S M et al.The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1996,220(1-2):41. |
[2] | Unterweger K;Kolednik O .The local deformation behaviour of MMCs:An experimental study[J].Mater Res Adv Techniq,2005,96(09):1063. |
[3] | Ruslan Z. Valiev;Terence G. Langdon .Principles of equal-channel angular pressing as a processing tool for grain refinement[J].Progress in materials science,2006(7):881-981. |
[4] | Furukawa M.;Horita Z.;Langdon TG. .Factors influencing the shearing patterns in equal-channel angular pressing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):97-109. |
[5] | García-Infanta J M;Zhilyaev A P;Cepeda-Jiménez C M et al.Effect of the deformation path on the ductility of a hypoeutectic Al-Si casting alloy subjected to equal-channel angular pressing by routes A,BA,Bc and C[J].Scripta Materialia,2008,58(02):138. |
[6] | Shunqi Wang;Wei Liang;Yu Wang;Liping Bian;Kehua Chen .A modified die for equal channel angular pressing[J].Journal of Materials Processing Technology,2009(7):3182-3186. |
[7] | Liang, W.;Bian, L.;Xie, G.;Zhang, W.;Wang, H.;Wang, S. .Transformation matrix analysis on the shear characteristics in multi-pass ECAP processing and predictive design of new ECAP routes[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(21/22):5557-5564. |
[8] | Stolyarov V V;Zhu Y T;Alexandrov I V et al.Influence of ECAP routes on the microstructure and properties of pure Ti[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2001,299(1-2):59. |
[9] | PEI-LING SUN;PO-WE KAO;CHIH-PU CHANG .Effect of Deformation Route on Microstructural Development in Aluminum Processed by Equal Channel Angular Extrusion[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2004(4):1359-1368. |
[10] | P. J. Apps;J. R. Bowen;P. B. Prangnell .The effect of coarse second-phase particles on the rate of grain refinement during severe deformation processing[J].Acta materialia,2003(10):2811-2822. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%