以钛酸正丁酯和三异丙醇胺为原料，在一定工艺条件下制备了钛酸叔胺酯固化剂，然后与E-51环氧树脂复配制备了电气绝缘浇铸料，分析了制备钛酸叔胺酯的各种影响因素和浇铸胶的性能等。结果表明：制备钛酸叔胺酯的最佳工艺条件为：钛酸正丁酯与三异丙醇胺的摩尔比为3∶4，真空度2660～3990 Pa，反应温度120～130℃；配制的浇铸料力学性能和电气性能优异，可满足应用要求。
A tertiary amine titanate was synthesized by copolymerization of tetrabutyl titanate and tri-iso-propanolamine under certain process condition. A casting plastic was prepared by mixing tertiary amine ti-tanate and E-51 epoxy resin, and different influence factors in the preparation of tertiary amine titanate and the properties of the casting plastic were studied. The results show that the optimum process condi-tion in preparation of tertiary amine titanate is that the molar ratio of tetrabutyl titanate and tri-isopropa-nolamine is 3∶4, the vacuum degree is 2 660~3 990 Pa, and the reaction temperature is 120~130℃. The prepared casting plastic has excellent mechanical and electrical properties, which can satisfy the applica-tion requirements.
参考文献
| [1] | 孙曼灵.环氧树脂应用原理与技术[M].北京:机械工业出版社,2002 |
| [2] | 陈平;王德中.环氧树脂及其应用[M].北京:化学工业出版社,2004 |
| [3] | 李冶.我国电工环氧树脂应用技术现状及今后的发展方向[J].绝缘材料通讯,1998(04):38-41. |
| [4] | 张敏,饶保林,田华杰,李小萍.混合动力汽车引擎用高导热环氧灌封胶的研制[J].绝缘材料,2011(01):5-10. |
| [5] | 李恩,虞鑫海,徐永芬,刘万章.高强度单组份环氧胶粘剂的制备及其性能研究[J].绝缘材料,2012(01):12-14. |
| [6] | 秦苏琼,黄道生,潘继红.环氧树脂灌封料的研究和发展[J].中国集成电路,2005(04):69-71. |
| [7] | 哈恩华,寇开昌,陈立新.环氧灌封材料的研究进展[J].化工进展,2003(10):1057-1060. |
| [8] | 阎睿,虞鑫海,李恩,刘万章.新型环氧胶粘剂的制备及其性能研究[J].绝缘材料,2012(02):12-14,18. |
| [9] | 罗志波,张跃庭.环氧树脂在高压电器绝缘中的应用[J].山东化工,2011(05):96-97,99. |
| [10] | 张秀菊,李波,林志丹,王勇,吕丽霞,许吉庆,郑少杰.电子封装用复合导热绝缘环氧胶粘剂的研制[J].绝缘材料,2009(01):1-4,14. |
| [11] | 姚燕,孟祥玲.环氧树脂用固化剂的研究进展[J].现代涂料与涂装,2007(04):37-40. |
| [12] | 谭家顶,程珏,郭晶,张军营.几种胺类固化剂对环氧树脂固化行为及固化物性能的影响[J].化工学报,2011(06):1723-1729. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%