通过分离式霍普金森压杆(SHPB)及准静态压缩实验研究铝合金7050-T7451高温高应变率下流变应力特征,利用准静态实验数据获得本构方程应变强化参数,利用SHPB实验数据获得室温下不同应变率(400～2500s-1)的应变率强化参数,以及应变率为2500s-1不同温度下(250～600℃)的热软化参数.利用不同幂次多项式对Johnson-Cook本构方程的热软化项拟合,最终选择五次多项式作为修正后本构方程热软化项.利用修正后本构方程对不同温度条件下应力应变曲线进行预测,实验数据与预测曲线表现出良好一致性.
参考文献
| [1] | 刘世兴.7050铝合金锻件的力学性能和断裂机制研究[J].材料工程,1991(04):34-37. |
| [2] | KLAMECKI B E .Incipient chip formation in metal cutting a three dimensional finite analysis[D].Urbana:University of Urana,Champaign,1973. |
| [3] | LAJCZOK M R .A study of some aspects of metal cutting by the finite element method[D].Raleigh:North Carolina State University,1980. |
| [4] | CARROLL J T;STRENKOWSKI J S .Finite element models of orthogonal cutting with application to single point diamond turning[J].International Journal of Mechanical Sciences,1988,30(12):899-920. |
| [5] | LIN Z C;LIN S Y .A coupled finite-element model of thermo elastic-plastic large deformation for orthogonal cutting[J].Journal of Engineering Materials and Technology,Transactions of the ASME,1992,114(02):218-226. |
| [6] | GORDON R;JOHNSON;WILLIAM H C.A constitutive model and data for metals subjected to large strains high strain rates and high temperatures[A].Florida,USA:American Defense Preparedness Association,1983:541-547. |
| [7] | Jing Shi;C. Richard Liu .The Influence of Material Models on Finite Element Simulation of Machining[J].Journal of manufacturing science and engineering,2004(4):849-857. |
| [8] | LIANG R Q;AKHTAR S K.A critical review of experimental results and constitutive models for BCC and FCC metals over a wide range of strain rates and temperatures[J].International Journal of Plasticity,1999(15):963-980. |
| [9] | KOLSKY H .An investigation of the mechanical properties of materials at very high rates of loading[J].Proceedings of the Physical Society,1949,B62(11):676-700. |
| [10] | 成群林 .航空整体结构件切削加工过程的数值模拟与实验研究[D].浙江大学,2006. |
| [11] | 付秀丽,艾兴,万熠,张松.铝合金7050高温流变应力特征及本构方程[J].武汉理工大学学报,2006(12):113-116. |
| [12] | Lennon AM.;Ramesh KT. .A technique for measuring the dynamic behavior of materials at high temperatures[J].International Journal of Plasticity,1998(12):1279-1292. |
| [13] | D.A.S. Macdougall;J. Harding .The measurement of specimen surface temperature in high-speed tension and torsion tests[J].International journal of impact engineering,1998(6):473-488. |
| [14] | Songwon Seo;Oakkey Min;Hyunmo Yang .Constitutive equation for Ti-6Al-4V at high temperatures measured using the SHPB technique[J].International journal of impact engineering,2005(6):735-754. |
| [15] | SHATLA M;ALTAN T .Analytical modeling of drilling and ball end milling[J].Journal of Materials Processing Technology,1999,98(01):125-133. |
| [16] | Hou, Q.Y.;Wang, J.T. .A modified Johnson-Cook constitutive model for Mg-Gd-Y alloy extended to a wide range of temperatures[J].Computational Materials Science,2010(1):147-152. |
| [17] | Madalina Calamaz;Dominique Coupard;Franck Girot .A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti-6Al-4V[J].International Journal of Machine Tools & Manufacture: Design, research and application,2008(3/4):275-288. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%