本文在VOF方法的基础上,采用粗细两套网格对高密度和高粘度比率下的气液两相流动模拟进行了研究分析.在细网格中求解流体体积函数方程,在粗网格中采用交错网格求解动量方程和压力修正方程,通过粗细网格间的数据传递获得求解动量方程时需要的准确的界面密度和粘度及控制体密度,克服了高密度和高粘度比率下通过插值方法计算界面密度和粘度及控制体密度带来较大误差的困难,保证了质量和动量同时守恒.高密度和高粘度比率下气液两相流动中气液交界面处密度、速度和压力急剧变化,为了保证格式的有界性和稳定性,采用稳定的有界高阶组合格式STOIC.最后模拟了不同工况下气泡在液体中的运动,并通过实验和模拟结果验证了方法的可行性及准确性.
参考文献
[1] | Murray Rudman .A volume-tracking method for incompressible multifluid flows with large density variations[J].International Journal for Numerical Methods in Fluids,1998(2):357-378. |
[2] | Youngs D L.Time-Dependent Multi-Material Flow with Large Fluid Distortion Numerical Method for Fluid Dynamics[M].New York:Academic Press,Inc,1982:273-285. |
[3] | Darwish M S .A New-high Resolution Scheme Based on the Normalized Variable Formulation[J].Numerical Heat Transfer Part B,1993,24:353-371. |
[4] | Grace J R .Shapes and Velocities of Bubbles Rising in Infinite Liquids[J].Transaction of the Institution of Chemical Engineering,1973,51(116):116-120. |
[5] | Annaland MV;Deen NG;Kuipers JAM .Numerical simulation of gas bubbles behaviour using a three-dimensional volume of fluid method[J].Chemical Engineering Science,2005(11):2999-3011. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%