总结了等径角挤压(Equal channel angular pressing,简称ECAP)制备超细晶材料的研究内容、原理、工艺参数、显微组织演化及其对材料性能的影响,介绍了研究等径角挤压工艺的有限元模拟软件,并概述了目前国内外对等径角挤压技术的研究进展.最后,指出了今后研究仍需努力的方向.
参考文献
| [1] | 李金山,曹海涛,胡锐,陈忠伟,耿兴国.等径角挤压法制备超细晶的研究现状[J].特种铸造及有色合金,2004(03):1-3. |
| [2] | 刘睿,孙康宁,毕见强.等径角挤压法制备块体超细晶材料的研究现状及展望[J].锻压技术,2005(06):85-89. |
| [3] | Segal VM. .MATERIALS PROCESSING BY SIMPLE SHEAR[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(2):157-164. |
| [4] | Valiev R Z;Krasilnikov N A;Tsenev N K .Plastic deformation of alloys with submicron-grained structure[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1991,137(15):35. |
| [5] | 王幸运,赵西成,杨西荣.室温ECAP工业纯钛组织热稳定性研究[J].轻金属,2010(03):48-50. |
| [6] | 王星,吕广庶,蔡刚毅.不同热处理工艺对7475铝合金ECAP的影响[J].新技术新工艺,2007(10):88-89. |
| [7] | 董洪波,黄映霞.6061铝合金等通道转角挤压时的流变性能[J].材料热处理学报,2011(02):70-74. |
| [8] | 卢庆亮,闵光辉,王常春,于化顺.Zn-5Al合金的等径弯曲通道变形[J].特种铸造及有色合金,2005(07):394-396. |
| [9] | 刘自乾,冯小明,张会.AZ31镁合金等通道挤压组织性能的研究[J].铸造技术,2010(05):638-640. |
| [10] | 王红霞,梁伟,赵琦,阴耀鹏,赵兴国.二元Mg-Al合金铸态及ECAP态组织与性能研究[J].稀有金属材料与工程,2008(11):2004-2007. |
| [11] | 陈彦博,李清燕,李英龙,何立子,丁桦.ECAP工艺对TiA13-P/Al复合材料组织的影响[J].稀有金属材料与工程,2008(10):1776-1780. |
| [12] | 姚筱春,赵西成,王效岗,刘晓燕.ECAP变形对超低碳钢组织与性能的影响[J].机械工程材料,2005(11):46-48,63. |
| [13] | 郭廷彪,丁雨田,胡勇,曹军,李更新.等通道转角挤压（ECAP）工艺的研究进展[J].兰州理工大学学报,2008(06):19-24. |
| [14] | Kiyotaka Nakashima;Zenji Horita;Minoru Nemoto .Influence of channel angle on the development of ultrafine grains in equal-channel angular pressing[J].Acta materialia,1998(5):1589-1599. |
| [15] | Iwahashi Y;Wang J;Horita Z et al.Principle of equal channel angular pressing for the prossing of ultra-fine grained materials[J].Scripta Materialia,1996,35(12):143. |
| [16] | 温石坤,胡治流,赵小莲,黄安斌.等径角挤压中内角半径作用的有限元模拟[J].热加工工艺,2010(07):91-94,97. |
| [17] | 刘晓峰,张敏刚,孙述利,孙钢,柴跃生.数值模拟内圆角半径对AZ31镁合金等径角挤压过程的影响[J].特种铸造及有色合金,2010(06):511-513. |
| [18] | 李继忠,丁桦,赵文娟,陈彦博.数值模拟外转角半径及背压对纯钛ECAP变形的影响[J].中国有色金属学报,2008(12):2178-2184. |
| [19] | Yoshinori iwahasgi .The process of grain refinement in equal-channel angular pressing[J].Acta materialia,1998(9):3317-3331. |
| [20] | Gholinia A;Prangnell P B;Markushev M V .The effect of strain path on the development of deformation structures in severely deformed aluminum alloys processed by ECAE[J].Acta Materialia,2000,48(05):1115. |
| [21] | 郑立静,陈昌麒,周铁涛,刘培英,曾梅光.ECAP细晶机制及对纯铝显微组织和力学性能的影响[J].稀有金属材料与工程,2004(12):1325-1328. |
| [22] | Chang J Y;Yoon J S;Kim G H .Development of submicron sized grain during cyclic equal channel angular pressing[J].Scripta Materialia,2001,45(03):34. |
| [23] | 王金锋,白朴存,张秀云,侯小虎,任永岗.ECAP对纯铝拉伸性能和断裂行为影响的研究[J].航空材料学报,2009(03):33-38. |
| [24] | 田景来,张忠明,郭学锋.ECAP纯铝L2的力学性能及微观组织研究[J].铸造技术,2008(10):1377-1380. |
| [25] | Akihiro Yamashita;Daisuke Yamaguchi;Zenji Horita;Terence G. Langdon .Influence of pressing temperature on microstructural development in equal-channel angular pressing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1):100-106. |
| [26] | Kim I.;Kim J.;Shin DH.;Lee CS.;Hwang SK. .Effects of equal channel angular pressing temperature on deformation structures of pure Ti[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):302-310. |
| [27] | Horita Z.;Furukawa M. .SUPERPLASTIC FORMING AT HIGH STRAIN RATES AFTER SEVERE PLASTIC DEFORMATION[J].Acta materialia,2000(14):3633-3640. |
| [28] | Berbon P B;Furukawa M;Horita Z et al.Influence of pressing speed on microstructural development in equal channel angular pressing[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1999,30(08):1989. |
| [29] | 石凤健,王雷刚,芦笙.坯料尺寸对等径角挤压材料变形的影响[J].江苏科技大学学报（自然科学版）,2008(04):38-41. |
| [30] | 赵美荣,许树勤,边丽萍,梁伟.等通道转角挤压工艺有限元分析[J].热加工工艺,2005(01):31-33. |
| [31] | 刘睿,孙康宁,毕见强.残余试样对等径角挤压过程的影响[J].中国机械工程,2006(17):1858-1860,1864. |
| [32] | 张忠明,徐春杰,田景来,王锦程,郭学锋.ECAP挤压L2纯铝的微观组织演化规律[J].西安理工大学学报,2005(03):227-231. |
| [33] | 吕爽,王快社,张兵,张西锋,陈萌莉.ECAP与ARB纯铝的微观组织和力学性能的比较[J].新技术新工艺,2007(04):61-63. |
| [34] | 石凤健,汪建敏,许晓静.等截面角形挤压的研究内容及现状[J].热加工工艺,2003(01):51-53. |
| [35] | 35 Valiev R Z .Structure and mechanical propertics of ultra gained metals[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,1997,234-236:59. |
| [36] | Petch N J .The cleavage strength of polycrystals[J].Iron Steel Inst,1953,174:25. |
| [37] | 刘国心,魏伟,魏坤霞.等通道变形高纯铝的显微组织与力学性能[J].机械工程材料,2008(06):66-69. |
| [38] | 田华,邓云伟,崔元萍.等通道转角挤压工艺制备块体超细晶纯铜的研究[J].热加工工艺,2011(05):13-14,19. |
| [39] | 王立忠,王经涛,郭成,陈金德.ECAP法制备超细晶铝合金材料的超塑性行为[J].中国有色金属学报,2004(07):1112-1116. |
| [40] | 杨晓明,杨林,刘腾,吴世丁,陈立佳,刘正.ECAP处理后ZK40的组织及超塑性[J].沈阳工业大学学报,2006(01):29-32,53. |
| [41] | 张郑,杜忠泽,王经涛,赵西成.7475铝合金ECAP变形及组织热稳定性[J].有色金属,2004(02):31-34,121. |
| [42] | 斯志军,丁雨田,周怀存,胡勇.ECAP变形后纯铜的热稳定性研究[J].铸造技术,2008(11):1584-1587. |
| [43] | 王庆娟,徐长征,郑茂盛,朱杰武,M.Buksa,L.Kunz.等径弯曲通道制备的超细晶铜的疲劳性能[J].金属学报,2007(05):498-502. |
| [44] | Chung CS.;Kim JK.;Kim HK.;Kim WJ. .Improvement of high-cycle fatigue life in a 6061 Al alloy produced by equal channel angular pressing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):39-44. |
| [45] | 杜海威,刘凯泉,郭义.DEFORM软件在加工制造业中的应用[J].一重技术,2008(03):103-105. |
| [46] | 薛永栋,韩静涛.基于DEFORM的金属压力加工数值模拟[J].冶金设备,2007(04):34-37. |
| [47] | 杨智强,史庆南,起华荣,王效琪,罗许,陈玉良,康立伟,肖潇.6062铝合金等径角挤压有限元模拟[J].兵器材料科学与工程,2009(05):12-15. |
| [48] | 毕见强,孙康宁,刘睿,范润华.等径角挤压过程的计算机模拟[J].塑性工程学报,2005(04):85-87. |
| [49] | 谭险峰,周庆,刘霞.基于Deform-3D的等通道转角挤压变形过程的计算机模拟[J].热加工工艺,2009(09):66-68. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%