通过分析X-cor夹层结构中Z-pin端部细观结构的显微镜照片,提出Z-pin端部树脂区椭圆形态的基本假设并建立X-cor夹层结构压缩模量的有限元模型,利用大型有限元软件ANSYS对其压缩模量进行数值计算,研究了Z-pin植入角度、直径和密度对X-cor夹层结构压缩模量的影响.结果表明,X-cor夹层结构的压缩模量随Z-pin植入角度的增加而减小,随Z-pin直径和密度的增加而增加.通过有限元计算,获得X-cor夹层结构参数对其压缩模量的影响规律,数值计算结果误差范围为士10％,验证所建立有限元模型的合理性,说明该模型可用于预测其压缩模量.
参考文献
| [1] | Carstensen T;Cournoyer D;Kunkel E.X-corTM advanced sandwich core material[A].Seattle:SAMPE,2001:452. |
| [2] | Andrea I. Marasco;Denis D.R. Cartie;Ivana K. Partridge .Mechanical properties balance in novel Z-pinned sandwich panels: Out-of-plane properties[J].Composites, Part A. Applied science and manufacturing,2006(2):295-302. |
| [3] | Denis D. Cartie;Norman A. Fleck .The effect of pin reinforcement upon the through-thickness compressive strength of foam-cored sandwich panels[J].Composites science and technology,2003(16):2401-2409. |
| [4] | Vaidya U K;Mahfuz H;Jeelani S .Damage tolerance of resin transfer molded composite sandwich constructions.In:AFRL-VA-WP-TR-1999-3053[R].Ohio:Tuskegee University Center for Advanced Materials,1999. |
| [5] | U.K. Vaidya;M.V. Kamath .Low-Velocity impact response of cross-ply laminated sandwich composites with hollow and foam-filled Z-pin reinforced core[J].Journal of Composites Technology & Research,1999(2):84-97. |
| [6] | Vaidya U K;Kamath M V;Hosur M V.Low velocity and compression-after-impact response of pin-reinforced sandwich composites[A].Tennessee:ASME,1999:1. |
| [7] | Vaidya U K;Palazotto A N;Gummadi L N B .Low velocity impact and compression-after-impact response of Z-pin reinforced core sandwich composites[J].ASME Journal of Engineering Materials and Technology,2000,122(10):434. |
| [8] | Vaidya U K;Kumar P;Hosur M V.Low velocity and high strain rate impact of pin reinforced foam core sandwich composite[A].San Antonio:SAMPE,1998:96. |
| [9] | Vaidya U K;Nelson S;Sinn B et al.Processing and high strain rate impact response of multi-functional sandwich composites[J].Computers and Structures,2001,52(03):429. |
| [10] | 田旭,肖军,李勇.X-cor夹层结构试制与性能研究[J].飞机设计,2004(01):22-25. |
| [11] | 杜龙,矫桂琼,黄涛.X状Z向碳pin增强泡沫夹层结构剪切刚度预报[J].固体力学学报,2007(04):369-374. |
| [12] | 杜龙,矫桂琼,黄涛,赵龙,黄峰.X状Z-pin增强泡沫夹层结构的剪切性能[J].复合材料学报,2007(06):140-146. |
| [13] | 杜龙 .X-cor夹层复合材料力学性能研究[D].西北工业大学,2007. |
| [14] | 杜龙,矫桂琼,黄涛.Z-pin增强泡沫夹层结构面压缩性能研究[J].航空材料学报,2008(04):101-106. |
| [15] | 郝继军,张佐光,张蕾,李敏,孙志杰.Z-pin植入参数对X-Cor夹层复合材料力学性能的影响[J].航空学报,2008(03):763-768. |
| [16] | 郝继军,张佐光,李敏,孙志杰.X-cor夹层复合材料平压性能分析[J].航空学报,2008(04):1079-1083. |
| [17] | A.P. Mouritz .Review of z-pinned composite laminates[J].Composites, Part A. Applied science and manufacturing,2007(12):2383-2397. |
| [18] | 李顺林;胡增强.复合材料力学引论[M].上海:上海交通大学出版社,1986:14. |
| [19] | 沃丁柱.复合材料大全[M].北京:化学工业出版社,2000:260. |
| [20] | 蔡为伦.复合材料力学导论[M].北京:第三机械工业部科学技术情报研究所,1980:12. |
| [21] | 陈祥宝.聚合物基复合材料手册[M].北京:化学工业出版社,2004:106. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%