为了掌握光亮剂对化学镀Ni-P层质量的影响,以次亚磷酸钠作为还原剂在pH=4~6的条件下对涤纶布进行了化学镀镍,研究表面活性剂十二烷基硫酸钠对涤纶白布Ni-P化学镀层质量的影响.结果表明:本工艺可以获得表面致密、光亮度较高、具有一定厚度的微黄的Ni-P镀层,获得高质量镀层的优化工艺为:11 g/L硫酸镍,15 g/L次亚磷酸钠,10 g/L柠檬酸钾,5 g/L乙酸钠,0.01 g/L十二烷基硫酸钠,温度75℃,时间25 min,pH值4~6,均匀搅拌.
Electroless Ni-P coating was prepared on the surface of terylene cloth from an acidic bath with a pH value of 4~6,using sodium hypophosphite as the reducing agent.The effect of sodium dodecyl sulfate(coded as SDS,a kind of surfactant)on the surface quality of the electroless Ni-P coating was investigated.Results indicate that the Ni-P coating is compact and bright and looks a little yellow.The optimized bath composition and plating parameters were determined as:11 g/L nickel sulfate,15 g/L sodium hypophosphite,10 g/L potassium citrate,5 g/L sodium acetate,and 0.01 g/L SDS,and a temperature of 75℃,plating duration of 25 min,pH value of 4~6,and uniform stirring.
参考文献
[1] | 苑国良.电磁污染及防护措施[J].机电一体化,2003(02):11-12. |
[2] | 郑利民;石英乔.金属化聚酯导电纤维金属化反应条件的研究[J].合成纤维,1993(11):16-21. |
[3] | 曾炜,谭松庭.PET纤维表面化学镀镍工艺及其性能研究[J].表面技术,2004(01):56-58. |
[4] | 傅雅琴,胡智文,陈文兴,袁骏,季振国.涤纶织物银催化铜镍复合镀的研究[J].合成纤维,2000(03):32-34,37. |
[5] | 李宁;屠振密.化学镀实用技术[M].北京:化学工业出版社,2003 |
[6] | 刘越,马晓光,崔河.防电磁波辐射功能纺织品的开发[J].印染,2001(08):50-52. |
[7] | HU Jian-wen,MA Jing,YAN Dong-Qing,GAO Qing,MENG Yong-qiang.The Studies of Composite Electroless Plating Process on Sintering Ndfeb Permanent Magnet[J].材料热处理学报,2004(05):1112-1114. |
[8] | Riccardo Polini;Fabio Bravi;Fabrizio Casadei;Pierangleo D'Antonio;Enrico Traversa .Effect of substrate grain size and surface treatments on the cutting properties of diamond coated Co-cemented tungsten carbide tools[J].Diamond and Related Materials,2002(3-6):726-730. |
[9] | 陈春成 .化学镀镍技术的发展与前景[J].电镀与涂饰,1998,17(04):50-51. |
[10] | 张钦京,杨德钧.我国化学镀技术交流与发展[J].表面工程资讯,2005(02):5-6. |
[11] | 王孝镕,顾慰中.化学镀镍磷合金工艺研究[J].电镀与涂饰,1999(02):43-46. |
[12] | 胡信国,张钦京.美国化学镀镍年会论文综述[J].电镀与涂饰,2003(02):35-37. |
[13] | 刘君武,吕珺,王建民,郑治祥,汤文明.粉体化学镀的研究及应用进展[J].金属功能材料,2005(04):35-38. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%