采用分离式Hopkinson压杆(SHPB)加载装置,分别用200 mm和150 mm打击杆以28 m/s速度对Ti-6Al-4V合金帽形试样进行强迫剪切实验,利用OM、SEM、TEM等手段分析了强迫剪切条件下Ti-6Al-4V合金的绝热剪切带演化特征和高应变率剪切变形条件下的失效模式.结果表明,在本文所述实验条件下,Ti-6Al-4V合金的绝热剪切带(ASB)表现为“白亮带”;ASB的宽度随加载时间的延长而增加;ASB边缘的裂纹是由于ASB的变形与基体的不协调而产生的,ASB中心部位的裂纹是由于非晶形成而后破碎导致的.
参考文献
| [1] | Lee D G;Lee S;Lee C S .Quasi-static and dynamic deformation behavior of Ti-6Al-4V alloy containing fine α2-Ti3A1 precipitates[J].Material Science and Engineering,2004,13:25-37. |
| [2] | Lee WS.;Lin CF. .Plastic deformation and fracture behaviour of Ti-6Al-4V alloy loaded with high strain rate under various temperatures[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):48-59. |
| [3] | Martinez F;Murr L E et al.Dynamic deformation and adiabatic shear microstructures associated with ballistic plug formation and fracture in Ti-6A1-4V targets[J].Materials Science and Engineering A,2007,454-455:581-589. |
| [4] | X. Teng;T. Wierzbicki;H. Couque .On the transition from adiabatic shear banding to fracture[J].Mechanics of materials,2007(2):107-125. |
| [5] | P.R. Guduru;A.J. Rosakis;G. Ravichandran .Dynamic shear bands: an investigation using high speed optical and infrared diagnostics[J].Mechanics of materials,2001(7):371-402. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%