In order to achieve higher density of P/M steels using the die wall lubrication compacting method or powder lubricant in warm compaction process,the influence of different process parameters on the green density of warm compacted samples was studied.According to the orthogonal test method,the authors systematically study the influence of the different compaction pressure,condition of lubrication and compaction temperature on the green density of the sample in the warm compaction process,and put forward the optimal process parameter of warm compaction experiment.It is found that,a high compaction pressure(≥700 MPa),die wall lubrication combined with a small amount of internal lubricants,and fitting compaction temperature by different condition of lubrication,are the optimal parameters in warm compaction process.
参考文献
| [1] | P Y Huang.The Principle of Powder Metallurgy[M].北京:冶金工业出版社,2004 |
| [2] | H G Rutz;F G Hanejko.High Density Processing of High Performance Ferrous Materials[A].MPIF Princeton,USA,1994:117. |
| [3] | F Hanejko.Warm Compaction,ASM Handbook[M].ASM International Materials Park,USA,1998:376-381. |
| [4] | Hiroyuki Endo.Technology Trends in Sintered StructuralParts[J].Hitachi Powdered Metals Technical Reports,2002(01):3-8. |
| [5] | P Lemieux;Y Thomas;P E Mongenon.Combining Electrostatic Die Wall Lubrication and Warm Compactionto Enhance Green and Sintered Properties of P/M Components[A].,2002:34-46. |
| [6] | M Kondoh;H Okajima.High Density Powder Compaction Using Die Wall Lubrication[A].,2002:47-54. |
| [7] | K Ueda;T Machida;M Iwakiri.Effect of Powder Lubricants and Compacting Temperature on the Higher Density of Iron-based Green Compacts[J].Hitachi Powdered Metals Technical Reports,2002(01):24-31. |
| [8] | J M Capus .Replacing Internal with External Lubricants[J].Metal Powder Report,1995,50(7-8):22. |
| [9] | G. F. Bocchini .Warm compaction of metal powders: why it works, why it requires a sophisticated engineering approach[J].Powder Metallurgy,1999(2):171-180. |
| [10] | G.JIANG;G.S.DAEHN;J.J.LANNUTTI .EFFECTS OF LUBRICATION AND ASPECT RATIO OF THE CONSOLIDATION OF METAL MATRIX COMPOSITES UNDER CYCLIC PRESSURE[J].Acta materialia,2001(8):1471-1477. |
| [11] | Y. Y. Li;T. L. Ngai;D. T. Zhang;Y. Long;W. Xia .Effect of die wall lubrication on warm compaction powder metallurgy[J].Journal of Materials Processing Technology,2002(1/3):354-358. |
| [12] | P Lemieux;S Pelletier;P E Mongeon.A New Approachto Die Wall Lubrication for P/M Applications[A].MPIF,2001:1-13. |
| [13] | 李元元,李金花,倪东惠,夏伟,陈维平.润滑剂含量对模壁润滑温压工艺的影响[J].粉末冶金技术,2004(06):341-344. |
| [14] | Metals Handbook.Properties and Selection:Irons,Steel and High Performance Alloys[M].Materials Park,OH,ASMInternationa,1990:627. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%