欢迎登录材料期刊网

材料期刊网

高级检索

用熔体快淬法制备(Nd,Pr)_(13)Fe_(80)Nb_1B_6快淬薄带并晶化处理,研究辊速和晶化条件对其组织和矫顽力的影响.结果表明,在10~20、25和35 m/s分别得到纳米晶、部分非晶和完全非晶薄带,且在18 m/s制备的薄带有较好的c轴各向异性.快淬态薄带的矫顽力随辊速(10~25 m/s)的增大而增加.非晶薄带晶化后由(Nd,Pr)_2Fe_(14)B相和富稀土相组成,且完全非晶薄带晶化后比部分非晶薄带晶化后的矫顽力要高,这是由于前者比后者具有更均匀的微结构造成的.非晶薄带晶化后矫顽力最大为1616 kA/m,高的矫顽力与添加Pr和Nb有关.

参考文献

[1] Chen Zhongmin;Hadjipanayis George C.;Chen Qun;Ma Baomin;Zhang Yong .Effect of wheel speed and subsequent annealing on the microstructure and magnetic properties of nanocomposite Pr2Fe14B/α-Fe magnets[J].Journal of Magnetism and Magnetic Materials,1999(1/2):8-16.
[2] Tian Zongjun;Li Shandong;Peng Kun et al.[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2004,380:143.
[3] Wang Zuocheng;Zhou Shouzeng;Qiao Yi et al.[J].Journal of Magnetism and Magnetic Materials,2000,218:72.
[4] Hirosawa S;Matsuura Y;Yamamoto H et al.[J].Journal of Applied Physics,1986,59(03):873.
[5] Betancourt J I;Davies H A .[J].Journal of Applied Physics,1999,85(08):5911.
[6] Betancourt I;Davies H A .[J].Journal of Magnetism and Magnetic Materials,2003,261(03):328.
[7] Wu Y Q;Kramer M J;Chen Z et al.[J].IEEE Transactions on Magnetics,2004,40(04):2886.
[8] Ahmad I;Davies H A;Buckley R A .[J].Journal of Magnetism and Magnetic Materials,1996,157-158:31.
[9] Sun Wensheng;Li Shandong;Quan Mingxiu .[J].Journal of Magnetism and Magnetic Materials,1997,176:307.
[10] Panagiotopoulos I.;Murthy A.S. .Magnetic properties and microstructure of melt-spun Nd-Fe-Ga-B alloys[J].IEEE Transactions on Magnetics,1995(6):3617-3619.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%