基于Ｂ４Ｃ和Ｃu材料具有明显电阻率及熔点差的特点，提出了在超高压下通电快速烧结Ｂ４Ｃ／Ｃｕ梯度复合材料的新工艺．在 ２～４ＧＰａ、１２ｋＷ，４０ｓ及适当的热处理条件下成功制备出了成分分布从０～１００％的接近理论密度的Ｂ４Ｃ／Ｃu层状复合材料；显微观察显示材料的成分和结构是呈梯度分布的．化学溅射实验表明其产额比 ＳＭＦ ８００核纯级石墨降低 ７０％；在Ｔｏｋａｍａｋ原位等离子体辐照下，材料表面无明显损伤．
Based on their distinct resistivity and melting point, a new approach for fabricating graded B4C/Cu composite by rapid self-resistance sintering under ultra-high
pressure was proposed in this paper and with which a near dense plasma facing material with 0-100% compositional distributions of B4C was obtained
on conditions of 12kW electric power input, 2-4GPa pressure applied, 40s duration and properly consecutive heat treatment. Well-graded composition and
structure of that composite were demonstrated by SEM analysis. Tests on plasma relevant performances show that the chemical sputtering yield of B4C/Cu graded
composite is 70% lower than that of SMF 800 nuclear graphite, and the surface of the composite is almost no damages after in-situ plasma irradiation in Tokamak apparatus.
参考文献
| [1] | Bolt H, Araki M, Linke J, et al. J. Nucl. Mater., 1996, 233--237: 809--813. [2] Lipa M, Gauthier E. Fusion Technology, 1994, Herschbach K, Maurer W, Vetter J E(editors),1995 Elsevier Science B.V., p.455--458. [3] Deschka S, linke J, Nickel H, et al. Fusion Engineering and Design, 1991, 18: 157--162. [4] Masanon Onoiuka, Seiji Tsujimura, Masahiko Toyoda, et al. Fusion Technology, 1996, 29: 73--82. [5] 曾毅，张叶芳，黄静琪(ZENG Yi, et al)等. 无机材料学报(Journal of Inorganic Materials)，1998， 13 (6)： 918--922. [6] 曾毅，张叶芳，黄静琪(ZENG Yi, et al)等. 无机材料学报(Journal of Inorganic Materials)?，1999， 14 (1)： 127--132. [7] Ge Chang-Chun, Li Yun-Kai. Proceedings of the 5th China-Japan symposium on "Materials in Advanced Energy system and Fission and Fusion Engineering", Xi’an, China, Nov. 2-6, 1998?：222--228. [8] 周张健, 葛昌纯, 卢观威, 等. 北京科技大学学报, 2000, 22 (2): 142--144. [9] Ling Y H, Ge C C, Zhou Z J, et al. Proceedings of International Conference on Engineering and Technology Sciences 2000. Beijing: New World Press, 2000, 3 (1): 301--306. [10] Hirano T, Teraki J, Yamada T. Proc. 1st Int. Symp. On Functionally Cradient Materials (FGM’90), Yamanouchi M.,Koizumi M., Hirai T., Shiota I. (Eds). Tokyo,Functionally Gradient Materials Forum and The Society of Non-Traditional Technology, p.5--10. [11] 钱家溥. ’96中国材料研讨会论文集. 北京: 化学工业出版社, 1998, 3(2): 215--218 [12] 李云凯. 耐高温等离子体冲刷功能梯度材料—碳化硼涂层. 北京科技大?学博士后出站报告. 1998. 52--69. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%