利用OM,SEM,XRD,TEM和显微硬度等方法对电子束焊接Ti3Al+高铌金属间化合物接头区域的显微组织特征进行了分析.结果发现:焊缝区域组织主要为有序亚稳态残余β相(B2相),其结晶形态为胞状束晶,焊缝区域存在一定程度的层状偏析;热影响区晶粒长大明显,晶粒的多边化过程不充分;熔合区和热影响区的显微硬度显著高于母材,焊缝中心区在整个焊缝部分硬度最低.
参考文献
| [1] | 彭超群,黄伯云,贺跃辉.Ni-Al系、Fe-Al系和Ti3Al金属间化合物研究进展[J].特种铸造及有色合金,2001(06):27-29. |
| [2] | Fritz A .Recent developments in the design and proessing of gamma-based titanium aluminides alloys[J].Materials Science Forum,2003,426-432(01):91-98. |
| [3] | Threadgill PL. .THE PROSPECTS FOR JOINING TITANIUM ALUMINIDES[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(0):640-646. |
| [4] | Baeslack Ⅲ W A;Mascorella T;Kelly T J .Weldability of a titanium aluminide[J].Welding Journal,1989,68(12):483S-498S. |
| [5] | David S A;Horton J A;Goodwin G M et al.Weldability and microstructure of a titanium aluminide[J].Welding Journal,1990,69(04):133-140. |
| [6] | Baeslack Ⅲ W A;Cieslak M .Effect of heat treatment on the structure properties and fracture of Nd:YAG laser weld Ti-14. 8wt. %-21. 3wt.% Nb[J].Scripta Materialia,1989,23(05):717-721. |
| [7] | Baeslack Ⅲ W A;Phillips D;Scarr G K .Characterization of the weld heat-affected zone in an alpha-two titanium aluminide[J].Materials Characterization,1992,28(01):61-73. |
| [8] | Martin G S;Albright C E;Jones T A .Evaluation of CO2 laser beam welding on a Ti3Al-Nb alloy[J].Welding Journal,1995,74(05):77-82. |
| [9] | Baeslack Ⅲ W A;Liu P S;Smith P R .Characterization of solid-state resistance welds in SiC-reinforced orthorhombic-based Ti-22Al-23Nb (at. %) titanium aluminide[J].Materials Characterization,1998,41(01):41-51. |
| [10] | 崔约贤;甄良;杨德庄 .Ti-23Al-14Nb-3V合金电子束焊接接头的显微组织及力学性能[J].焊接学报,1998,19(04):130-134. |
| [11] | Wu A P;Zou G S;Ren J L et al.Microstructure and mechanical properties of Ti-24Al-17Nb(at. %)laser beam welding joints[J].Intermetallics,2002,10(07):647-652. |
| [12] | 武英,唐之秀,杨德庄,李道明.Ti3Al-Nb合金不同组织状态下拉伸断裂行为显微分析[J].中国有色金属学报,1996(03):99-105. |
| [13] | 汪小平,郑运荣.Ti3Al+TiAl片层组织的不连续粗化转变[J].中国有色金属学报,1998(02):233-238. |
| [14] | 龙霓东,朱金华.Ti3Al基合金的弹性变形能与空蚀[J].中国有色金属学报,2003(03):560-564. |
| [15] | ZHANG J W;Li S Q;Zou D X et al.Processing and microstructure control of (α2 +B2 +O) alloy sheet in Ti-Al-Nb system[J].Intermetallics,2000,8(5-6):699-702. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%