航空发动机的应用条件决定了部分钛合金需要在较高的温度条件下使用，而在高温条件下，相对于材料本身性能的退化，表面抗氧化腐蚀能力更为重要，决定了合金的最终使用温度。由于合金成分的不同，各类高温钛合金在高温环境下的抗高温气体腐蚀能力、腐蚀产物以及腐蚀机理也有所差异。为此，结合国内外高温钛合金的最新研究成果，全面阐述了各类高温钛合金的氧化研究现状以及其高温氧化机理，并指出了高温钛合金的防氧化措施及今后的研究方向。
Application condition of aeroengine determines the part of the titanium alloys need to be used under high temperature conditions. But the surface oxidation resistance of the material is more important than the performance of itself under the high temperature,and the surface oxidation resistance determines the final use temperature of the alloy. Because of the different composition of the alloy,the ability of anti-high temperature gas corrosion,corrosion products and corrosion mechanism are also different. Base on the latest development of high-temperature titanium alloy both domestic and abroad,oxidition behavior and mechanism under high temperature of the alloy is summarized while the method of antioxidation and the orientation of the study in the future is put forward.
参考文献
| [1] | 莱茵斯C;皮特尔斯 M;陈振华.钛与钛合金[M].北京:化学工业出版社,2005 |
| [2] | Wanjara P;Jahazi M;Monajati H;Yue S;Immarigeon JP .Hot working behavior of near-alpha alloy IMI834[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):50-60. |
| [3] | 陈磊,王富岗.抗高温氧化合金的研究进展[J].材料导报,2002(05):27-29. |
| [4] | 黄定辉,洪权,卢亚锋,郭萍,戚运莲.钛合金的高温抗氧化性及其影响因素分析[J].钛工业进展,2012(03):1-5. |
| [5] | 黄旭 .钛合金阻燃机制研究[D].西北工业大学,1998. |
| [6] | 周廉;赵永庆;王向东.中国钛合金材料及应用发展战略研究[M].北京:化学工业出版社,2012 |
| [7] | 崔文芳,魏海荣,罗国珍.IMI834和Ti-1100在550℃～750℃高温下的氧化行为[J].稀有金属材料与工程,1997(02):31-35. |
| [8] | Mokee D W.Symposium on high temperature intermetallic alloys[A].Boston:Materials Research Society,1990:231. |
| [9] | 张钧;李东.高温钛合金中的α2 相[M].沈阳:东北大学出版社,2002 |
| [10] | Leyens C;Peters M;Kaysser W A .Influence of microstruc-ture on oxidation behavior of near-α titanium alloys[J].Materials Science and Technology,1996,12(03):213-218. |
| [11] | Sai Srinadh K V;Vakil Singh .Oxidation behavior of the near α-titanium alloy IMI834[J].Bulletin of Materials Science,2004,27(04):347-354. |
| [12] | 辛社伟,洪权,卢亚锋,奚正平,郭萍,戚运莲,曾立英.Ti600高温钛合金600℃下表面稳定性研究[J].稀有金属材料与工程,2011(08):1422-1425. |
| [13] | 贾蔚菊,曾卫东,刘建荣,王青江,周义刚.Ti60高温钛合金氧化行为研究[J].稀有金属材料与工程,2010(05):781-786. |
| [14] | 蔡伯成,刘培英,陶冶,张绍勇.Ti60合金高温连续氧化行为研究[J].材料工程,2000(08):34-36. |
| [15] | 贾新云,刘培英,陶冶.Ti60合金在650～750℃高温下的氧化行为[J].材料工程,2003(06):18-22. |
| [16] | Liu Peiying;Tao Ye;Pei Gen;Cai Bocheng;Li Xiangyang .The influence of Nb{sup}+ and Al{sup}+ implantation on the oxidation behavior of Ti-60 alloy[J].Surface & Coatings Technology,2000(0):89-93. |
| [17] | Hua-Ping Xiong;Wei Mao;Wen-Li Ma;Yong-Hui Xie;Yun-Feng Chen;Hong Yuan;Xiao-Hong Li .Liquid-phase aluminizing and siliconizing at the surface of a Ti60 alloy and improvement in oxidation resistance[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):108-113. |
| [18] | Zhong Z Y .Intermemetallic compounds for high temperature structural materials[J].Materials Science Progress,1900,4(02):132-142. |
| [19] | 钱余海,李美栓,张亚明.Ti3Al基合金在700～850℃空气中的循环氧化行为[J].中国有色金属学报,2004(09):1609-1614. |
| [20] | Tomasi A;Gialanella S.Oxidation phenomena in a Ti3 Al base-alloy[J].Thermochimica Acta,1995(269/270):133-143. |
| [21] | Shemet V;Hoven H;Quadakkers W J .Oxygen uptake and depletion layer formation during oxidation of γ-TiAl based alloys[J].INTERMETALLICS,1997,5(04):311-320. |
| [22] | Li XY.;Fujita K.;Iwamoto N.;Matsunaga Y.;Nakagawa K. Taniguchi S.;Zhu YC. .Influence of Al film deposition and following treatment on the high temperature isothermal oxidation behavior of a gamma-TiAl-based alloy[J].Surface & Coatings Technology,2001(1/3):276-280. |
| [23] | Liu Zhenyu;Wang Guodong .Improvement of oxidation resistance of γ-TiAl at 800 and 900 ℃ in air by TiAl2 coating[J].Materials Science and Engineering A,2005,397(1/2):50-57. |
| [24] | X.J. Zhang;Q. Li;S.Y. Zhao;C.X. Gao;L. Wang;J. Zhang .Improvement In The Oxidation Resistance Of A γ-tial-based Alloy By Sol-gel Derived Al_2o_3 Film[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2008(5P1):1860-1864. |
| [25] | Gao, J.;He, Y.;Gao, W. .Oxidation behavior of γ-TiAl based alloy with Al_2O_3-Y_2O_3 composite coatings prepared by electrophoretic deposition[J].Surface & Coatings Technology,2011(19):4453-4458. |
| [26] | Abu Suilik S B;Takeshita K;Kitagawa H et al.Preparation and high temperature oxidation behavior of refractory disilicide coatings for γ-TiAl intermetallic compounds[J].INTERMETALLICS,2007,15(08):1084-1090. |
| [27] | 李向阳,张永刚,陈昌麒.Al含量对二元Ti-Al合金高温氧化行为的影响[J].稀有金属材料与工程,1997(05):35-39. |
| [28] | 曲恒磊,周廉,魏海荣,赵永庆.部分TiAl基合金的抗氧化性评价[J].钛工业进展,2001(02):1-4. |
| [29] | 黄旭,曹春晓,马济民.阻燃钛合金的高温氧化行为[J].稀有金属材料与工程,1997(06):27-30. |
| [30] | Jiang Huiren;Hirohasi Mitsuji;Lu Yun.Effect of Nb on the high temperature oxidation of Ti-(0-50at.%)Al[J].Scripta Materialia,2002(46):639-643. |
| [31] | Gauer L;Alperine S;Steinmetz P et al.Influence of niobium additions on high-temperature-oxidation behavior of Ti3 Al alloys and coatings[J].Oxidation of Metals,1994,42(1/2):49-74. |
| [32] | 熊玉明,朱圣龙,王福会,李世琼.合金元素及搪瓷涂层对Ti3Al系列合金抗氧化性能的影响[J].金属学报,2002(z1):626-629. |
| [33] | 李威,肖来荣,温燕宁,胡加瑞,蔡圳阳,殷傲宇.钛合金高温抗氧化涂层的研究进展[J].材料导报,2011(01):123-126. |
| [34] | 孙才;孙红亮;黄泽文 等.钛合金表面抗氧化改性技术的研究进展[J].材料导报,2011,25(05):507-509. |
| [35] | Leyens C;Peters M;Kaysser M A.Oxidation resistant Ti-Al-(Cr)coating for titanium alloys and titanium aluminides[A].Russia:Russian Academy of Sciences,2001:866-875. |
| [36] | 吴小美;李伟华;陆锋 .钛合金叶片防护涂层研究---十五科研项目工作[J].装备环境工程,2006,3(03):116-119. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%