对比研究了六个常用的湍流模型预测压气机转子叶尖复杂旋涡流动的能力,选用的六个湍流模型分别为,混合长度模型,SA模型,标准κ-ε模型,SSTκ-ω模型,v2-f模型和雷诺应力模型.通过与压气机转子尖区典型的大尺度旋涡结构-泄漏涡和角区旋涡的SPIV详细测量结果的对比,分析了六个湍流模型预测转子尖区复杂流动的能力;在结合试验的基础上,根据数值模拟结果对转子尖区流动进行了更为深入的分析.
参考文献
| [1] | Liu BJ;Yu XJ;Liu HX;Jiang HK;Yuan HJ;Xu YT .Application of SPIV in turbomachinery[J].Experiments in Fluids: Experimental Methods and Their Applications to Fluid Flow,2006(4):621-642. |
| [2] | Liu B J;Yu X J;Liu H X et al.Evolution of the Tip Leakage Vortex in an Axial Compressor Rotor[ASME Paper 2004-GT-53703][R].,2004. |
| [3] | Van Zante D E;Strazisar A J;Wood J R et al.Recommendations for Achieving Numerical Simulation of Tip Clearance flows in Transonic Compressor Rotors[J].Journal of Turbomachinery,Transactions of the ASME,2000,122:733-742. |
| [4] | Gupta A;Khalid S A;McNulty G S et al.Prediction of Low Speed Compressor Rotor Flow fields with Large Tip Clearances[ASME Paper GT-2003-38637][R].,2003. |
| [5] | Lee G H;Park J;Baek J H .Performance Assessment of Turbulence Models for the Quantitative Prediction of Tip Leakage Flow in Turbomachines[ASME Paper GT-2004-53403][R].,2004. |
| [6] | 蒋浩康.研究转子内流动的大尺寸轴流压气机实验装置和动态测量技术[J].航空动力学报,1992(01):1. |
| [7] | 柳阳威,刘宝杰.湍流模型在压气机转子尖区流动模拟中的对比研究[C].2007年热机气动热力学学术会议,2007:393-400. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%