参考了较多国内外有关文献,较为系统地分析了金属基体激光熔覆陶瓷基复合涂层裂纹的形成机理,总结出降低裂纹倾向的方法:选择合适的激光熔覆参数;激光熔覆时对金属基体进行预热或后热处理;采用添加中间过渡层或梯度涂层的方法;在金属基体激光熔覆陶瓷基复合材料中添加增韧、增塑元素.这些方法为控制金属基体激光熔覆陶瓷基复合涂层的裂纹形成提供了有益参考.
参考文献
[1] | Yan, H.;Zhang, P.;Yu, Z.;Li, C.;Li, R. .Development and characterization of laser surface cladding (Ti,W)C reinforced Ni30Cu alloy composite coating on copper[J].Optics & Laser Technology,2012(5):1351-1358. |
[2] | Du Baoshuai;Zou Zengda;Wang Xinhong et al.Laser cladding of in situ TiB2/Fe composite coating on steel[J].Applied Surface Science,2008,254:6489. |
[3] | 何祥明,刘秀波,杨茂盛,石世宏,王明娣,傅戈雁.奥氏体不锈钢激光熔覆镍基复合涂层高温磨损行为[J].中国激光,2011(09):79-84. |
[4] | 周香林;李秀真;杨士浩 等.激光熔覆陶瓷涂层与金属基体之间的界面特性[J].激光技术,1996,20(02):91. |
[5] | 高永建,张世堂,邓智昌,宝民,周健松.激光熔覆高温自润滑覆层的裂纹成因与控制[J].中国表面工程,2011(04):13-18. |
[6] | 栗卓新,祝弘滨,李辉,孙日超.热喷涂金属陶瓷复合涂层研究进展[J].材料工程,2012(05):93-98. |
[7] | 钟敏霖;刘文今 .45k高功率CO2激光熔覆过程中裂纹行为的实验研究[J].应用激光,1999,19(05):193. |
[8] | 徐成伟,王振全,胡欣,黄成功.1Cr17Ni2不锈钢表面激光熔覆层的微观组织和性能研究[J].表面技术,2011(01):11-13,33. |
[9] | 陈静,林鑫,王涛,杨海欧,黄卫东.316L不锈钢激光快速成形过程中熔覆层的热裂机理[J].稀有金属材料与工程,2003(03):183-186. |
[10] | Online study of cracks during laser cladding process based on acoustic emission technique and finite element analysis[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2008(5 Pt.2):3267. |
[11] | 宋光明,吴钢,黄婉娟.单向送粉双向扫描激光熔覆工艺防止裂纹的试验研究[J].金属热处理,2005(05):26-28. |
[12] | 孙鸿卿,钟敏霖,刘文今,何金江,李晓莉,朱晓峰.定向凝固镍基高温合金上激光熔覆Inconel 738的裂纹敏感性研究[J].航空材料学报,2005(02):26-31. |
[13] | 胡木林,谢长生,祝柏林,王爱华.多道搭接激光熔覆镍基合金中裂纹断口形貌研究[J].材料热处理学报,2001(02):23-26. |
[14] | 余廷,邓琦林,董刚,杨建国,张伟.钽对激光熔覆镍基涂层的裂纹敏感性及力学性能的影响[J].机械工程学报,2011(22):25-30. |
[15] | Chen, J.-Y.;Conlon, K.;Xue, L.;Rogge, R. .Experimental study of residual stresses in laser clad AISI P20 tool steel on pre-hardened wrought P20 substrate[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(27/28):7265-7273. |
[16] | Masoud Alimardani;Vahid Fallah;Amir Khajepour et al.The effect of localized dynamic surface preheating in laser cladding of Stellite 1[J].Surface and Coatings Technology,2010,204:3911. |
[17] | 邹小斌,尹登科,谷建军.关于激光熔覆裂纹问题的研究[J].激光杂志,2010(05):44-45. |
[18] | 陈静,杨海欧,李延民,黄卫东.激光快速成形过程中熔覆层的两种开裂行为及其机理研究[J].应用激光,2002(03):300-304. |
[19] | 张维平,刘硕.激光熔覆Ni基金属陶瓷复合涂层的裂纹研究[J].复合材料学报,2005(03):98-102. |
[20] | 匡建新,汪新衡,秦小平,朱航生.激光熔覆Ti基WC增强复合涂层的裂纹研究[J].热加工工艺,2010(14):110-112,119. |
[21] | Shengfeng Zhou;Xiaoyan Zeng;Qianwu Hu;Yongjun Huang .Analysis Of Crack Behavior For Ni-based Wc Composite Coatings By Laser Cladding And Crack-free Realization[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2008(5P1):1646-1653. |
[22] | Amado J M;Tobar M J;Yánez A et al.Crack free tungsten carbide reinforced Ni(Cr) layers obtained by laser cladding[J].Phys Procedia,2011,12:338. |
[23] | 陈志坤,刘敏,曾德长,马文有.激光熔覆裂纹的产生原因及消除方法探究[J].激光杂志,2009(01):55-57. |
[24] | 周继烈,程耀东.Ni基WC金属陶瓷激光熔覆开裂特性的试验研究[J].电加工与模具,2003(04):32-34. |
[25] | 刘双 .核阀密封面无钴镍基合金涂层材料及熔覆工艺研究[D].苏州大学,2010. |
[26] | 赵静娟,何占启.激光熔覆裂纹问题的研究[J].新技术新工艺,2011(10):58-61. |
[27] | Jendrzejewski R;Sliwinski G;Krawczuk M;Ostachowicz W .Temperature and stress during laser cladding of double-layer coatings[J].Surface & Coatings Technology,2006(6):3328-3334. |
[28] | 周圣丰,曾晓雁,胡乾午.金属陶瓷复合涂层的激光熔覆与无裂纹的实现[J].应用光学,2008(01):76-80. |
[29] | Wang, Y.D.;Tang, H.B.;Fang, Y.L.;Wang, H.M. .Effect of heat treatment on microstructure and mechanical properties of laser melting deposited 1Cr12Ni2WMoVNb steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2010(1):474-479. |
[30] | 徐大鹏,周建忠,郭华锋,季霞.激光熔覆裂纹产生机理及控制方法分析[J].工具技术,2007(04):24-28. |
[31] | 赵亚凡,陈传忠.激光熔覆金属陶瓷涂层开裂的机理及防止措施[J].激光技术,2006(01):16-19,22. |
[32] | 刘其斌,朱维东,陈江.高温合金激光熔覆涂层中裂纹防止方法的研究[J].贵州工业大学学报(自然科学版),2000(05):56-59. |
[33] | 古一,王志法,夏长清.涂层与基底的热膨胀系数差对垂直界面的微裂纹的影响[J].湖南有色金属,2007(03):33-36. |
[34] | 廖钟亮,魏森泉,周哲,张小林,邹文栋,陈学岗.添加Y2O3减少45钢表面激光熔覆Ni基合金微裂纹的研究[J].国外金属热处理,2001(01):39-41. |
[35] | 王清波,窦新旺,晁明举,袁斌,梁二军.Mo对高硬度镍基合金激光熔覆层组织和耐磨性的影响[J].应用激光,2005(02):97-100. |
[36] | 杜利平,梁二军,陈长青,雒江涛.CeO2对镍基碳化钨激光熔覆层性能的影响[J].激光技术,2002(05):354-356. |
[37] | 潘应君,许伯藩,张细菊.La2O3对激光熔覆TiC/Ni基复合涂层的影响[J].稀土,2003(04):49-52. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%