采用激光加工技术在Ti6A14V表面分别加工直线、网格和具有规则点阵状结构的表面纹理,采用自组装技术制备自组装分子膜.采用扫描电镜、形貌分析仪和接触角测量仪对成膜后的钛合金表面进行形貌和接触角的表征与测量.结果表明,通过激光加工和沉积自组装分子膜,可显著增大Ti6A14V的水接触角.其中直线纹理的试样表面水接触角可达124.8°,网格纹理的试样表面接触角可达126.1°,点阵状纹理的试样表面接触角可达151.6°.表面接触角与表面粗糙度相关,随着表面粗糙度值的增大,接触角呈增大趋势,当表面粗糙度＞4μm时,接触角均＞150°,形成超疏水表面.
参考文献
| [1] | 郑黎俊,乌学东,楼增,吴旦.表面微细结构制备超疏水表面[J].科学通报,2004(17):1691-1699. |
| [2] | Neinhuis C;Barthlott W .Characterization and distribution of water-repellent, self-cleaning plant surfaces.[J].Annals of Botany,1997(6):667-677. |
| [3] | Nishinq T;Meguro M;Nakamae K et al.[J].Langmuir,1999,15(03):4321-4323. |
| [4] | Nakajima A .[J].Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi / Journal of the Ceramic Society of Japan,2004,112(10):533-540. |
| [5] | Nakajima A;Hashimoto K;Watanabe T .[J].Monatshefte Fur Chemie,2001,132:31-41. |
| [6] | 李艳峰,于志家,于跃飞,霍素斌,宋善鹏.铝合金基体上超疏水表面的制备[J].高校化学工程学报,2008(01):6-10. |
| [7] | Qian BT;Shen ZQ .Fabrication of superhydrophobic surfaces by dislocation-selective chemical etching on aluminum, copper, and zinc substrates[J].Langmuir: The ACS Journal of Surfaces and Colloids,2005(20):9007-9009. |
| [8] | Shirtcliffe N J;McHale G;Newton M I et al.[J].Advanced Materials,2004,16:1929-1932. |
| [9] | Wenzel R N .[J].Industrial and Engineering Chemistry,1936,28:988-994. |
| [10] | Cassie A B;Baxter S .[J].Transactions of the Faraday Society,1944,40:546-551. |
| [11] | Shibuichi S;Onda T;Satoh N et al.[J].Journal of Physical Chemistry,1996,100(50):19512-19517. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%