采用热等静压技术处理了高铌TiAl合金铸锭,对直径为115 mm的高铌TiAl合金铸锭在1150～1300℃进行了热锻开坯.结果表明:热等静压处理后的高铌TiAl合金由大量粗大的α2/γ片层晶粒和少量的γ等轴晶、B2相等组成,晶粒度约为80～150μm;通过变形量为75%的2次锻造成形后锻饼表面和内部质量较为完好,没有出现裂纹和太多的氧化现象;铸态粗大片层组织在变形后基本破碎,晶粒得到明显细化.
参考文献
| [1] | Ward C M;Froes F H .Developments in the synthesis of lightmetals[J].Journal of The Minerals,Metals & Materials Society,1994,46(01):28-31. |
| [2] | Henriques V A R;Sandim H R Z;Coelho G C .Microstructural evolution during hot pressing of the blended elemental Ti-6%Al-7%Nb alloy[J].Materials Science and Engineering A,2003,A347(1-2):315-324. |
| [3] | Viswanathan G B;Vasudevan V K .Processing, microstructures and tensile properties of a Ti-48% Al alloy[J].Scripta Metallurgica et Materialia,1995,32:1705-1711. |
| [4] | 刘咏;黄伯云;周科朝 等.TiAl基合金包套锻造工艺[J].中国有色金属学报,2000,10(zk):6-9. |
| [5] | Zhang W J;Evangelista E;Francesconi L et al.Deformation microstructure of Nb-modified TiAl intermetallics Tis4 A16 Nb at ambient temperature[J].Materials Science and Engineering A,1996,A207(02):202-207. |
| [6] | NAKA S;Thomas M;Khan T.Potential and prospects of some intermetallic compounds for structural applications[J].TMS Warrendale PA,1992:291-294. |
| [7] | KIMURA M;Hashimoto K;Morikawa H .[J].Materials Science and Engineering A,1992,A152:54-59. |
| [8] | Kim Y W .[J].Journal of The Minerals,Metals & Materials Society,1989,41(07):24-26. |
| [9] | WANG Jin-guo;CHEN Guo-liang;SUN Zu-qing et al.Structure of a new ordered ternary intermetallic compound in TiAl+Nb system[J].Acta Metallurgica Sinica,1994,30(11):A525-530. |
| [10] | Z.C. Liu;J.P. Lin;S.J. Li .Effects of Nb and Al on the microstructures and mechanical properties of high Nb containing TiAl base alloys[J].Intermetallics,2002(7):653-659. |
| [11] | Koeppe C;Bartels A;Seeger J et al.General aspects of the thermal-mechanical treatment of two phase intermetallic TiAl compounds[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1993,24:1795-1802. |
| [12] | 张永刚;韩雅芳;陈国良.金属间化合物结构材料[M].北京:国防工业出版社,2001:701-703. |
| [13] | 张永刚;韩雅芳;陈国良.金属间化合物结构材料[M].北京:国防工业出版社,2001:778-780. |
| [14] | 李书江 .高铌TiAl合金微合金化及蠕变性能的研究[D].北京科技大学,2001. |
| [15] | 吕炎.锻压成形理论与工艺[M].北京:机械工业出版社,1991:128. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%