以丙烯酸酯为原料,通过改进的溶液聚合工艺,合成了高性能耐高温丙烯酸酯压敏胶粘剂(PSA),考察了聚合工艺、丙烯酸(AA)含量、丙烯酸丁酯(BA)与丙烯酸2-乙基己酯(2-EHA)的质量配比以及固化剂的种类和用量等因素对PSA性能的影响.实验结果表明,聚合工艺(单体浓度和加料方式、反应温度、反应时间等)对PSA的综合性能有显著影响；在改进的聚合工艺条件下,当AA含量在3％,BA:2-EHA质量比为2,采用异氰酸酯固化剂(GH)固化,GH的最佳加入量为0.8％时,PSA的粘接性和耐高温性能优异.
参考文献
| [1] | 柳彬彬,向如亭,吕红,李永胜,杨春强.FPC保护膜用耐高温PSA胶带的研制[J].中国胶粘剂,2012(02):44-49. |
| [2] | 赖婉婷,傅和青,蓝仁华.耐高温丙烯酸酯压敏胶的研制[J].中国胶粘剂,2010(08):23-26. |
| [3] | Xiaowen Zhang;Yuting Ding;Guanli Zhang .Preparation and rheological studies on the solvent based acrylic pressure sensitive adhesives with different crosslinking density[J].International Journal of Adhesion & Adhesives,2011(7):760-766. |
| [4] | Lili Qie;Marc A. Dub .Manipulation of chain transfer agent and cross-linker concentration to modify latex micro-structure for pressure-sensitive adhesives[J].European Polymer Journal,2010(6):1225-1236. |
| [5] | Shen HZ;Zhang JY;Liu SJ;Liu GD;Zhang LQ;Qu XW .Effect of the chain-transfer-agent content on the emulsion polymerization process and adhesive properties of poly(n-butyl acrylate-co-acrylic acid) latexes[J].Journal of Applied Polymer Science,2008(3):1793-1802. |
| [6] | 王农跃,翟珍,张广林,史玉荣,张立群,瞿雄伟,张留成.链转移剂加入方式对丙烯酸酯乳液聚合过程及压敏粘接性能的影响[J].高分子材料科学与工程,2009(07):20-23. |
| [7] | Asahara J.;Hori N.;Takemura A.;Ono H. .Crosslinked acrylic pressure-sensitive adhesives. I. Effect of the crosslinking reaction on the peel strength[J].Journal of Applied Polymer Science,2003(9):1493-1499. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%