随着AZ91D镁合金微弧氧化反应的进行,膜层逐渐增厚,膜层表面的喷射孔洞和喷射沉积物粗大化,膜层表面粗糙度增大.微弧氧化反应时膜层内部的应力集中会使膜层萌生微裂纹.对基体进行固溶处理后可以改善其微孤氧化膜层中微裂纹的数量和形态以及膜层表面的粗糙度,并能提高微弧氧化膜层的生长速率,同时降低微弧氧化过程的能耗.时效处理会使微弧氧化膜层中的残余应力得以释放,微弧氧化膜的形貌没有发生明显改变,即膜层表面的微裂纹在数世和形态上仍好于未经热处理基体膜层.微弧氧化处理不会引起基体组织的显著变化.在硅酸盐溶液体系中,AZ91D镁合金表面参与微弧氧化反应的Al比Mg少得多,同时还伴随着一个溶液中的Si向镁合金基体内部渗透的过程.
With the micro-arc oxidation process of AZ91D magnesium alloys going, the thickness of coatings increases gradually. The coarser the discharging channels and the ejecting deposition are, the rougher the coating surface is. The micro-cracks on coatings are resulted from the stress concentration in coatings. The amount and morphology of micro-cracks, surface roughness and growth rate of coatings are improved after substrates have been treated with the solid-solution that also benefit to energy saving of the micro-arc oxidation process. The residual stresses are released during the aging treatment, and the coating morphology is kept almost unchanged in terms of the amount and morphology of micro-cracks. And the microstructure of substrates has not been changed after the micro-arc oxidation treatment. More magnesium elements in AZ91D have participated in the micro-arc oxidation reaction conducted in silicate electrolyte. And silicon elements from the electrolyte also have diffused into magnesium substrates at the same time.
参考文献
| [1] | H.L.Mordike,T.Ebert,Magnesium:properties-applications-potential,Materials Science and Engineering,302A,37(2001) |
| [2] | ZHANG Jin,ZHANG Zonghe,Magnesium and Its Appli-cation (Beijing,Chemical Industry Press,2004) p.41(张津,章宗和,镁合金及应用,(北京,化学工业出版社,2004)p.41) |
| [3] | MA Youping,YANG Lei,XU Kewei,State and progress of magnesium alloy modification technologies,LAFT,35(9),6(2007)(马幼平,杨蕾,徐可为,镁合金表面改性技术研究现状及进展,轻合金加工技术,35(9),6(2007)) |
| [4] | ZHAO Dazhi,LU Guimin,Developing status of light al-loys for semi-solid forming,Foundry,56(6),572(2007)(赵大志,路贵民,半固态成形轻合金的发展概况,铸造,56(6),572(2007)) |
| [5] | S.Ji,Z.Fan,M.J.Bevis,Semi-solid processing of engineer-ing alloys by a twin-screw rheomoulding process,Materials Science and Engineering,A299,210(2001) |
| [6] | CAI Qizhou,WANG Lishi,WEI Bokang,LIU Quanxin,Electrochemical performance of micro-arc oxidation films formed on AZ91D magnesium alloy in silicate and phos-phate electrolytes,Surface & Coating Technology,200,3727(2006) |
| [7] | Li Weiping,Zhu Liqun,Li Yihong,Electrochemical oxida-tion characteristic of AZ91D magnesium alloy under the action of silica sol,Surface & Coatings Technology,201,1085(2006) |
| [8] | Hongping Duan,Chuanwei Yan,Fuhui Wang,Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D,Elec-trochimica Acta,52,3785(2007) |
| [9] | HoungYu Hsiao,HuaChih Tsung,WenTa Tsai,Anodiza-tion of AZ91D magnesium alloy in silicate-containing elec-trolytes,Surface & Coatings Technology,199,127(2005) |
| [10] | LI Yuandong,The research on thixo-forming and heat treatment of magnesium alloy AZ91D,PhD dissertation,Lanzhou University of technology,2(2005)(李元东,AZ91D镁合金触变成型工艺与热处理研究,博士学位论文,兰州理工大学,2(2005)) |
| [11] | WANG Huimin,CHEN Zhenhua,YAN Hongge,LIU Yingke,Heat-treatment of magnesium alloys,Heat Treat-ment of metals,30(11),49(2005)(王慧敏,陈振华,严红革,刘应科,镁合金的热处理,金属热处理,30(11),49(2005)) |
| [12] | M.X.Zhang,P.M.Kelly,Crystallography of Mg_(17)Al_(12) pre-cipitates in AZ91D alloy,Scripta Materialia,48,647(2003) |
| [13] | D.Duly,J.P.Simon,Y.Brechet,On the competition be-tween continuous and discontinuous precipitation in bi-nary Mg-Al alloys,Acta Metallurgica et Materialia,43(1),101(1995) |
| [14] | A.L.Yerokhin,X.Nie,A.Leland,A.Matthews,S.J.Dowey,Plasma electrolysis for surface engineering,Surface and Coatings Technology,122,73(1999) |
| [15] | A.G.Rakoch,V.V.Khokhlov,V.A.Bautin,N.A.Lebedeva,Yu.V.Magurova,I.V.Bardin,Model concepts on the mech-anism of micro-arc oxidation of metal materials and the control over this process,Protection of Metals,42(2),158(2006) |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%