选用电工纯铁与无氧铜两种组元材料,采用轧制复合工艺制备了Cu-Fe-Cu磁屏叠层材料,对轧合件进行力学性能分析,并运用金相显微镜、扫描电镜、能谱仪等手段分析复合件界面形貌及复合机制。结果表明：采用50%热轧压下率可使铜、铁板有效复合,轧合件内各叠层厚度尺寸稳定、叠层间平行度良好,经简单退火后其叠层间无明显扩散发生,叠层间抗剪切强度达167MPa,此时热轧的主要复合机制为机械啮合。
Roll-bonding was used to prepare of Cu-Fe-Cu laminated composite for electromagnetic shielding,oxygen-free copper sheet and electrical iron sheet were chosen as its components.Mechanical property experiments on the laminated composite were executed by using of material testing machine,the microstructure and mechanism of bonding were investigated by means of metalloscope,SEM and EDS.The results show that Cu and Fe can be bonded by hot rolling when reduction rate achieves 50%,thickness deviation and parallelism of each laminates are fine.After the annealing process,it is hard to find the diffusion of Cu and Fe,and the shear strength of interface comes to 167 MPa.The mechanism of bonding by hot rolling is mechanically engage.
参考文献
| [1] | 刘献明,付绍云,张以河,孙正滨,李广涛.雷达隐身复合材料的研究进展[J].材料导报,2004,18(5):8-11. |
| [2] | 古映莹,邱小勇,胡启明,刘雪颖.电磁屏蔽材料的研究进展[J].材料导报,2005,19(2):53-56. |
| [3] | 聂士东.低频磁屏蔽膜的制备与性能研究[D].北京:北京工业大学,2007. |
| [4] | 袁希平.纯铁DT9性能简介[J].真空电子技术,1993(3):43-45. |
| [5] | 卫红凡.浅谈低氧铜杆和无氧铜杆的性能及应用[J].机械管理开发,2005,12(6):54-55. |
| [6] | 于宝义,齐克敏,安振之.铜一钢一铜三层复合板室温轧制成形工艺及结合机制的研究[J].热加工工艺,2001(3):34-36. |
| [7] | Watanabe Yuiehiro, Ishihara Keiichi N, Shingu P Hideo. Strength of nano-thiekness multi-layered Fe - Cu composites produced by repeated pressing and rolling [J]. Seripta Mater, 2001, 44(8/9): 1853-1857. |
| [8] | Cepeda-Jim4nez C M, Hidalgo P, Pozuelo M, Ruano 0 A, Carrefio F. Influence of constituent materials on the impacttoughness and fracture mechanisms of hot - roll - bonded aluminum multilayer laminates [ J ]. Metallurgical and Materials Transactions A, 2010, 41(1): 61-72. |
| [9] | Chaudhari Gajanan P, Acoff Viola. Cold roll bonding of multi- layered hi-metal laminate composites [J]. Composites Science and Technology, 2009, 69(10) : 1667-1675. |
| [10] | 王海山,王志法,姜国圣,肖学章,莫文剑.退火温度对轧制复合Cu/Mo/Cu电子封装材料性能的影响[J].金属热处理,2004,29(5):17-20. |
| [11] | Oya Tetsuo, Tiesler Nicolas, Kawanishi Seiichiro, Yanagimoto Jun, Koseki Toshihiko. Experimental and numerical analysis of multilayered steel sheets upon bending [J]. Journal of Materials Processing Technology, 2010, 210 (14) : 1926-1933. |
| [12] | Nambu S, Michiuehi M, Inoue J, Koseki T. Effect of interracial bonding strength on tensile ductility of multilayeredsteel composites[J]. Composites Science and Technology, 2009, 69(11/12) : 1936-1941. |
| [13] | 刘玲,黄争鸣,董国华,袁国青,林刚.含环氧-SiC复合微/纳米纤维的层合板制备及其力学性能[J].复合材料学报,2006,23(3):20-24. |
| [14] | 刘韦华,矫桂琼,管国阳,常岩军.Z-pin增强陶瓷基复合材料拉伸和层间剪切性能[J].复合材料学报,2007,24(1):86-90. |
| [15] | 李兴刚,齐克敏,朱泉.锌/铝轧制复合研究[J].中国有色金属学报,1999,9(2):300-304. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%