研究了高锰型马氏体热作模具钢SDH3-Mod的室温冲击韧性、回火稳定性和热疲劳性能,并结合透射电镜(TEM)分析了锰对其微观组织的影响.结果表明:SDH3-Mod钢回火组织中残余奥氏体以薄膜状存在于马氏体板条间,提高冲击韧性,延缓裂纹扩展；同时,锰在高温时阻碍碳化物粗化长大和延迟基体的回复再结晶,提高抗回火软化能力和热疲劳性能,使SDH3-Mod性能优于H13.
参考文献
| [1] | 崔崑.中国模具钢现状及发展（Ⅰ）[J].机械工程材料,2001(01):1-5,10. |
| [2] | 姜祖赓.模具钢[M].北京:钢铁冶金出版社,1988 |
| [3] | 崔崑.国内外模具用钢发展概况[J].金属热处理,2007(01):1-11. |
| [4] | Unterweiser P M;Boyer H E;Kubbs.Heat Treater's Guide,Standard Practices and Procedures for Steel[M].Ohio:Metals Park,1982 |
| [5] | 潘晓华,朱祖昌.H13热作模具钢的化学成分及其改进和发展的研究[J].模具制造,2006(04):78-85. |
| [6] | 刘徽平.瑞典模具钢的特性与用途介绍[J].国外金属热处理,1999(04):12. |
| [7] | Saleha M H;Priestnerb R .Retained Austenite in Dual-Phase Silicon Steels and Its Effect on Mechanical Properties[J].Journal of Materials Processing Technology,2001,113(01):587. |
| [8] | 佟倩,吴晓春,闵娜.高热强性热作模具钢SDH3的研究[J].钢铁研究学报,2010(02):46-50. |
| [9] | Qingchun Zhou;Xiaochun Wu;Na Min .Effect of Si Addition on Kinetics of Martensitic Hot-Work Die Steel During Tempering[J].Metals and Materials International,2011(4):547-552. |
| [10] | 周青春,吴晓春,闵永安,闵娜.硅在高硅马氏体型热作模具钢中作用机理研究[J].材料科学与工艺,2010(06):772-776. |
| [11] | 孙珍宝.合金钢手册[M].北京:冶金工业出版社,1984 |
| [12] | Emmanuel De Moor .Austenite stabilization through manganese enrichment[J].Scripta materialia,2011(2):185-188. |
| [13] | Norstrom L A;Svensson M;Ohrberg V .Thermal Fatigue Behavior of Hot Work Tool Steels[J].Metals and Technology,1981,8(10):376. |
| [14] | 吴晓春,许珞萍,闵永安,张恒华,徐晓.回火温度对4Cr5MoSiV1钢和8407钢热疲劳性能的影响[J].金属热处理,2001(04):7-10. |
| [15] | 徐晓 .H13类钢的各向异性及其热疲劳损伤因子的研究[D].上海:上海大学,2003. |
| [16] | Delagnes D;Lamesle P;Mathon MH;Mebarki N;Levaillant C .Influence of silicon content on the precipitation of secondary carbides and fatigue properties of a 5%Cr tempered martensitic steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):435-444. |
| [17] | 谢豪杰,吴晓春.热作模具钢热疲劳损伤程度的计算机评定[J].上海金属,2008(03):55-58. |
| [18] | 陈英伟,吴晓春,宋雯雯,闵永安.含铌热作模具钢中碳化物的演变对热稳定性的影响[J].材料热处理学报,2010(05):75-80. |
| [19] | Zhou, Q.;Wu, X.;Shi, N.;Li, J.;Min, N. .Microstructure evolution and kinetic analysis of DM hot-work die steels during tempering[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(18):5696-5700. |
| [20] | Miyamoto G;Oh J C;Hono K .Effect of Partitioning of Mn and Si on the Growth Kinetics of Cementite in Tempered Fe0.6mass％C Martensite[J].Acta Materialia,2007,55:5027. |
| [21] | Duchateau D;Guttmann M .An X-ray Microanalysis Study of the Partition of Manganese in 6 and 9% Mn Cryogenic Steels and Its Influence on the Stability of Austenite Dispersed in a Tempered Martensitic Matrix[J].Acta Metallurgica,1987,29(07):1291. |
| [22] | 徐祖耀.相变原理[M].北京:科学出版社,1988 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%