通过对高速冷滚打成形原理进行分析，利用有限元软件Abaqus对LY12铝合金高速冷滚打成形过程进行数值模拟；计算了成形过程中的变形击打力；并利用自行设计的试验装置进行了连续成形过程中变形击打力的试验验证。结果表明：高速冷打滚成形的数值模拟结果与实际试验结果基本一致，验证了数值模拟的有效性，为进一步深入研究高速冷滚打成形技术奠定了理论及应用基础。
The finite element software of Abaqus was applied to simulating the high-speed cold roll-beating forming of LY12 aluminum alloy after the forming principle of high-speed cold roll-beating forming was analyzed, and the deformation strike force during froming process was calculated. The deformation strike force during continuous forming process was verified by a self-developed experimental equipment. The results show that the numerical simulated results of high-speed cold roll-beating forming were in agreement with the factual tested results, and the validity of the numerical simulation was verified, which provides a theoretical and applied basis for in-depth study of high-sneed cold roll-beating forming technology.
参考文献
| [1] | 李敏贤,闵乃燕,安桂华,陈世兴.精密成形技术发展前沿[J].中国机械工程,2000(01):183-186. |
| [2] | 谢谈,贾德伟,蒋鹏,尉哲.精密塑性成形技术在中国的应用与进展[J].机械工程学报,2001(07):100-104. |
| [3] | 王仲仁,滕步刚,汤泽军.塑性加工技术新进展[J].中国机械工程,2009(01):108-112. |
| [4] | 张士宏,周丽新,王忠堂.板材零件局部体积成形技术研究[J].塑性工程学报,2008(02):31-36. |
| [5] | 崔凤奎,徐永福,赵魏.花键冷滚打和铣削加工的金属组织变形研究[J].锻压技术,2008(02):70-74. |
| [6] | 崔凤奎,李言,周彦伟,周志立,张丰收.渐开线花键轴冷滚轧工艺试验[J].农业机械学报,2006(12):189-192. |
| [7] | Silva MB;Skjoedt M;Atkins AG;Bay N;Martins PAF .Single-point incremental forming and formability-failure diagrams[J].The Journal of Strain Analysis for Engineering Design,2008(1):15-35. |
| [8] | P. A. F. Martins;N. Bay;M. Skjoedt;M. B. Silva .Theory of single point incremental forming[J].CIRP Annals,2008(1):247-252. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%