Creep and stress relaxation behavior, the elastic modulus and fracture toughness of machinable Ti3SiC2 at various temperatures from 20 to 1250℃ were investigated by means of three-point bending tests. The experiments were performed respectively at:(I) fixed stress and changed temperatures, and (ii) fixed temperature and changed stresses. A creep resistance parameter that represents the probability of creep deformation in a given condition was defined as a function of both applied stress and the threshold stress, varying in a range from 0 to 1. Elastic modulus at high temperatures was measured through comparing relative slopes of loading curves in cyclic loading curve. The fracture toughness measured by SENB method showed a stable value in the range of 25-1000℃, but over 1000℃, it declined abruptly from ～6.7MPa m1/2 to～2.0MPa. Mi/2 at 1200℃.
参考文献
| [1] | M W BarsoumandT El-Raghy .[J].Journal of the American Ceramic Society,1996,79:1953. |
| [2] | Y C Zhou;Z M Sun;S Q Chen;Y Zhang .[J].Materials Research Innovations,1998,2:142. |
| [3] | Y C Zhou;Z M Sun;J Sun;Y Zhang and J Z Zhou .[J].Zeitschrift fur Metallkunde,2000,91:329. |
| [4] | T El-Raghy;A Zavaliangos;M W Barsoum .[J].Journal of the American Ceramic Society,1997,80:513. |
| [5] | I M Low;S Lee;B R Lawn;M.W. Barsoum .[J].Journal of the American Ceramic Society,1998,81:225. |
| [6] | M. Radovic;M. W. Barsoum;T. El-Raghy .Effect of temperature, strain rate and grain size on the mechanical response of Ti_3SiC_2 in tension[J].Acta materialia,2002(6):1297-1306. |
| [7] | M.Radovic;M.W.Barsoum .Tensile properties of Ti_3SiC_2 in the 25-1300 deg C temperature range[J].Acta materialia,2000(2):453-459. |
| [8] | Y W BaoandY C Zhou .[J].Materials Letters,2003,57:4018. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%