采用碳纤维增强环氧树脂复合材料层压板与热塑性粘接剂共固化工艺,制备层压板焊接面覆有粘接剂的复合材料结构试件,利用粘接剂作为焊接介质对热固性环氧树脂基碳纤维复合材料结构试件进行电阻焊接.粘接剂与环氧树脂基体界面形成了半互穿网络聚合物(S-IPN)结构,有利于提升粘接剂与环氧树脂基体界面粘接性能,提高接头强度.对焊接试件的接头力学性能表征表明:采用AX8900粘接剂作为焊接介质的试件接头强度最高;单搭接剪切强度(LSS)可以达到7.35MP;编织碳纤维和金属网作为加热电阻可以使接头强度较单向碳纤维加热电阻分别提高60％和73％;[0°/90°]编织碳纤维加热电阻焊接的AX8900试件的平均层间断裂韧性可达1880J/m2.根据[0°/90°]编织碳纤维加热电阻焊接AX8900试件的LSS建立了基于焊接时间和功率密度的焊接工艺窗口.
参考文献
| [1] | 刘代军;陈亚莉 .航空高性能低成本树脂基复合材料的发展[J].材料工程,2009,S2:101-103. |
| [2] | 张靠民;李敏;顾轶卓 等.汽车用先进复合材料的低成本技术[J].玻璃钢/复合材料,2012,222(1):226-231. |
| [3] | ANONYMOUS.JEC EUROPE 2014 REVIEW[J].High-performance composites,2014(3):30-35. |
| [4] | REICHWEIN;HEINZ-GUNTER;LANGEMEIER Paul.Strong and Economical-Epoxy Fiber-Reinforced Structures for Automotive Mass Production[M].Troy,Michigan,USA:Society of Plastics Engineers Automotive Composites Conference and Exhibition,2010 |
| [5] | 刘洪波,迪力穆拉提·阿卜力孜,吴旺青,谢磊,段玉岗,李涤尘.聚合物基复合材料电阻焊接技术研究进展[J].玻璃钢/复合材料,2015(01):97-102. |
| [6] | STAVROV.D;BERSEE.H.E.N .Resistance welding of thermoplastic composites-an overview[J].COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,2005,36(1):39-54. |
| [7] | PANNEERSELVAM,K;ARAVINDAN,S;HAQ,AN .Study on resistance welding of glass fiber reinforced thermoplastic composites[J].,2012,41:453-459. |
| [8] | VILLEGAS Irene Fernandez;MOSER Lars;YOUSEFPOUR et al.Process and performance evaluation of ultrasonic,induction and resistance welding of advanced thermoplastic composites[J].JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS,2013,8:1007-1024. |
| [9] | Dr.W Roman.Hillermeier;Dr.HASSON Tareq;FRIEDRICH Lars.Advanced Thermosetting Resin Matrix Technology for Next Generation High Volume Manufactureof Automotive Composite Structures[J].Composites:Automotive,2012 |
| [10] | WU.W;F.Klunker;XIE L;JIANG B et al.Simultaneous binding and ex situ toughening concept for textile reinforced pCBT composite:Influence of prdorming binders on interlaminar fracture properties[J].Composites Part A:Applied Science and Manufacturing,2013,53:190-203. |
| [11] | AGEORGES C;Ye L;HOU M .Experimental investigation of theresistance welding for thermoplastic-matrix composites Part Ⅰ :heating element and heat transfer[J].Composites Science and Technology,2000,60:1027-1039. |
| [12] | TALBOT (E)dith;HUBERT Pascal;DUB(E) Martine et al.Optimization of thermoplastic composites resistance welding parameters based on transient heat transfer finite element modeling[J].JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS,2013,5:669-717. |
| [13] | STAVROV D;BERSEE HEN;BEUKERS A.Experimental investigation of luge-scale welding of carbon fiber tbermoplastic composite materials[A].San Diego,2003:ID-1552. |
| [14] | Designation:D 5528-01.Standard Test Method for Mode Ⅰ Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites[S]. |
| [15] | AGEORGES.C;Ye.L .Resistance welding of thermosetting compesite/thermoplastic composite joints[J].COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,2001,32(11):1603-1612. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%