利用高能脉冲精密冷补技术(LHPPR)在Cr12MoV钢基体焊接M2丝材,研究脉冲电流,脉冲宽度对焊层截面的形貌,组织硬度的影响.结果表明,随着脉冲电流的增大,堆积宽度增大,堆积高度有少许降低;随着脉冲宽度的增加,堆积宽度高度随之增加.焊层组织为典型凝固组织,随着能量的增高,晶粒会长大,焊层和基体呈冶金结合,结合界面无裂纹孔隙等缺陷,热影响区由表面向基体组织由马氏体向马氏体+回火索氏体转变.焊层显微硬度达700～850 HV,远高于300 HV左右的基体.
参考文献
| [1] | Jian-Jun Fang;Zhu-Xin Li;Yao-Wu Shi .Microstructure And Properties Of Tib_2-containing Coatings Prepared By Arc Spraying[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2008(13):3849-3858. |
| [2] | Liu YY;Yu J;Huang H;Xu BH;Liu XL;Gao Y;Dong XL .Synthesis and tribological behavior of electroless Ni-P-WC nanocomposite coatings[J].Surface & Coatings Technology,2007(16/17):7246-7251. |
| [3] | Borrego L P;Pires J T B;Costa J M et al.Mould steels repaired by laser welding[J].Engineering Failure Analysis,2008,16:596-607. |
| [4] | Alexander V .The use of bipolar current pulses in electropark alloying of metal[J].Surface and Coating Technology,2003,168:129-135. |
| [5] | Meng LD;Zhang Q;Shen W et al.Microstructure and properties of high-energy pulsed cold-welded surfacing layers on 18Cr2Ni4WA steel[J].Advanced Materials Research,2012,557-559:1353-1357. |
| [6] | 张庆,杨军伟,孟令东,梁志杰,沈维.零件再制造中局部损伤的治理方法[J].中国表面工程,2012(01):110-114. |
| [7] | 张庆,孟令东,杨军伟,原津萍.高能脉冲精密冷补技术用于修复零件表面局部缺损[J].中国表面工程,2011(01):79-83. |
| [8] | Liming Liu;Minghua Chen .Effect of laser pulse on recovery delay of arc plasma based on ion migration behavior in the pulsed laser-arc hybrid welding process[J].Optics and Lasers in Engineering,2013(2):96-103. |
| [9] | 黄峰 .Cr13Mo1SiV1钢模具激光焊接修复工艺研究[D].四川:西华大学,2010. |
| [10] | Nogi K;Ogino K;Mclean A.The temperature coefficient of the surface tension of pure liquid metals[J].Metallurgical and Materials Transactions B,1986(17 B):163-170. |
| [11] | Lu, F.;Li, H.;Ji, Q.;Zeng, R.;Wang, S.;Chi, J.;Li, M.;Chai, L.;Xu, H. .Characteristics of the functionally graded coating fabricated by plasma transferred arc centrifugal cladding[J].Surface & Coatings Technology,2011(19):4441-4446. |
| [12] | F. Madadi;F. Ashrafizadeh;M. Shamanian .Optimization of pulsed TIG cladding process of stellite alloy on carbon steel using RSM[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2012(1):71-77. |
| [13] | 胡庚祥;蔡殉;戎咏华.材料科学基础[M].上海:上海交通大学出版社,2000 |
| [14] | 崔忠圻;刘北兴.金属学与热处理原理[M].哈尔滨:哈尔滨工业大学出版社,1998 |
| [15] | 徐庆东,林鑫,宋梦华,杨海欧,黄卫东.激光成形修复2Cr13不锈钢热影响区的组织研究[J].金属学报,2013(05):605-613. |
| [16] | 薛蕾,卢鹏辉,陈静,林鑫,黄卫东.激光修复1Cr12Ni3MoVN合金的组织性能研究[J].中国激光,2010(03):887-890. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%