A 3-D micro cell model with multi-fibers has been presented to study the effects of breakage of single fiber on the whole creep behavior of fiber reinforced composites by finite element method (FEM). Before the fiber breakage, the stresses of all fibers are identical. With the creep time increasing, stress in fiber increases but stress in matrix decreases. It is assumed that the fiber breakage occurs when the stress in fiber reaches a critical value. The stress redistribution resulted from the breakage of fiber has been obtained. The influence on the axial stress of the broken fiber is local. The stress in the all fiber sections is not uniform. There is a local stress concentration in the matrix. And this stress concentration in the matrix is more and more serious with the creep deformation. The stress transference of the loading due to the fiber breakage has been studies numerically. It is found that the fibers near to the broken fiber will take over more loading.
参考文献
| [1] | Z. Xia;T. Okabe;W. A. Curtin .Shear-lag versus finite element models for stress transfer in fiber-reinforced composites[J].Composites science and technology,2002(9):1141-1149. |
| [2] | Y P Jiang;Z F Yue;J S Wan .[J].Journal of Computational Mechanics,2003,20(06):743. |
| [3] | Z F Yue .[J].Applied Mathematics and Mechanics,2002,23(04):381. |
| [4] | 丁向东,连建设,江中浩,胡平.短纤维增强金属基复合材料拉伸应力场的有限元数值分析[J].金属学报,2000(02):196-200. |
| [5] | G Z Kang;Q Gao .[J].复合材料学报,2000,17(02):20. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%