{"currentpage":1,"firstResult":0,"maxresult":10,"pagecode":5,"pageindex":{"endPagecode":5,"startPagecode":1},"records":[{"abstractinfo":"在Zr-0.7Sn-1.07Nb-0.32Fe-0.08Cr (T5)合金中添加不同含量Bi制备成T5+xBi (x=0.1,0.3,0.5,质量分数,％)合金,用静态高压釜腐蚀试验研究了T5+xBi合金在400℃/10.3 MPa过热蒸汽中的耐腐蚀性能.用TEM和SEM分别观察了合金的显微组织和氧化膜断口形貌.结果表明:当添加的Bi含量≤0.3％时,合金中只检测到了密排六方结构的Zr(Nb,Fe,Cr)2第二相;当Bi含量达到0.5％时,合金中除了析出大量的Zr(Nb,Fe,Cr)2第二相外,还发现少量正交结构的ZrBi2型Zr(Bi,Fe,Sn)2和结构未确定的Zr-Nb-Bi-Fe-Cr-Sn第二相.这说明Bi在T5+xBi合金中固溶在α-Zr基体中的最大含量(CBi)为:0.3％≤Bii＜0.5％(质量分数);Bi的添加促进了T5合金中原来固溶在α-Zr基体中的Sn以第二相形式析出.当添加的Bi含量≤0.3％时,耐腐蚀性能得到一定程度的改善,而添加0.5％ Bi后耐腐蚀性能反而降低.结合显微组织分析结果可以说明:固溶在α-Zr基体中的Bi可改善合金的耐腐蚀性能,而合金中析出含Bi和Sn的第二相后又会降低合金的耐腐蚀性能.","authors":[{"authorName":"陈传明","id":"7f9fb41a-d020-4f3a-9159-24532985b86d","originalAuthorName":"陈传明"},{"authorName":"姚美意","id":"f1a841a2-6e06-4ab8-bdfc-74a4b1d9d3f5","originalAuthorName":"姚美意"},{"authorName":"周军","id":"6633a153-967d-4304-8c16-7fbfadb71350","originalAuthorName":"周军"},{"authorName":"周邦新","id":"aad053aa-949e-4e75-b2aa-6604cb3b2e8c","originalAuthorName":"周邦新"},{"authorName":"张金龙","id":"74aa590c-cd82-4aa9-82fe-30ca11f136a3","originalAuthorName":"张金龙"},{"authorName":"李强","id":"05ff285b-2325-4be5-897f-cceca852133e","originalAuthorName":"李强"},{"authorName":"彭剑超","id":"b421c6c3-28ee-4896-8ed9-d90f0538ab92","originalAuthorName":"彭剑超"},{"authorName":"梁雪","id":"1d18fe5f-f9b1-4234-a348-d99631c00f2f","originalAuthorName":"梁雪"}],"doi":"","fpage":"933","id":"2526119d-2fd5-4d7c-88ca-0f02e57599f0","issue":"4","journal":{"abbrevTitle":"XYJS","coverImgSrc":"journal/img/cover/XYJS.jpg","id":"67","issnPpub":"0258-7076","publisherId":"XYJS","title":"稀有金属"},"keywords":[{"id":"3065a850-ec62-44c3-90d2-3215c81323eb","keyword":"锆合金","originalKeyword":"锆合金"},{"id":"256ddf2f-e701-4818-a958-ccb0a5694032","keyword":"合金元素Bi","originalKeyword":"合金元素Bi"},{"id":"024b44c3-aeb0-4632-b0e8-7a0ce47a6ae1","keyword":"耐腐蚀性能","originalKeyword":"耐腐蚀性能"},{"id":"ac9eb687-83a3-48d8-94f9-3bd5f4720c4f","keyword":"显微组织","originalKeyword":"显微组织"}],"language":"zh","publisherId":"xyjsclygc201504032","title":"Zr-0.7Sn-1.07Nb-0.32Fe-0.08Cr-xBi合金在400℃过热蒸汽中耐腐蚀性能的研究","volume":"44","year":"2015"},{"abstractinfo":"用静态高压釜腐蚀实验研究了添加0.05％～0.3％(质量分数)Bi对Zr-1Nb合金在400℃/10.3 MPa过热蒸汽中耐腐蚀性能的影响;用SEM观察了腐蚀140 d的氧化膜显微组织.结果表明:随着Bi含量的增加,Zr-1Nb-XBi合金的耐腐蚀性能逐渐提高.说明添加Bi可以改善Zr-1Nb合金的耐腐蚀性能.氧化膜显微组织观察表明,Bi的添加使氧化膜内表面起伏程度变小,断口上等轴晶与柱状晶的界面附近孔隙和微裂纹减少.这说明Bi的添加可以有效延缓氧化膜的显微组织演化过程,从而提高了合金的耐腐蚀性能.","authors":[{"authorName":"黄娇","id":"791dd7df-c218-4811-a0b6-2888b301cb5e","originalAuthorName":"黄娇"},{"authorName":"徐启迪","id":"ea812b80-a7fa-43be-a421-fb912dbdcf81","originalAuthorName":"徐启迪"},{"authorName":"姚美意","id":"78cca946-b3bb-482b-a380-6571c6dde344","originalAuthorName":"姚美意"},{"authorName":"陈文觉","id":"d480cf7a-c311-4e45-84b7-99e2726febc9","originalAuthorName":"陈文觉"},{"authorName":"张金龙","id":"443dc260-6341-4bbf-8abf-db863b9ab8e8","originalAuthorName":"张金龙"},{"authorName":"周邦新","id":"8e585a0c-68cc-4ddc-bf13-aca4c060efd2","originalAuthorName":"周邦新"},{"authorName":"李强","id":"6badcfde-9587-4bba-bce3-80a82edc37d8","originalAuthorName":"李强"},{"authorName":"沈剑韵","id":"a240bfde-e32e-414d-bd8d-5fb9135aef7e","originalAuthorName":"沈剑韵"}],"doi":"","fpage":"214","id":"38a8d2e0-18a0-4913-b405-f766faf77b47","issue":"1","journal":{"abbrevTitle":"XYJSCLYGC","coverImgSrc":"journal/img/cover/XYJSCLYGC.jpg","id":"69","issnPpub":"1002-185X","publisherId":"XYJSCLYGC","title":"稀有金属材料与工程"},"keywords":[{"id":"d3ae3be2-2f57-40b5-a9c4-0e6d18209d05","keyword":"Zr-1Nb","originalKeyword":"Zr-1Nb"},{"id":"b0b7da32-7cff-404d-bfcb-470b78a71ba8","keyword":"Bi","originalKeyword":"Bi"},{"id":"ace73fa3-2bdd-4dfc-a371-2c5a20581e99","keyword":"耐腐蚀性能","originalKeyword":"耐腐蚀性能"},{"id":"ea6af3c4-5bee-466f-9b97-6f64816711dc","keyword":"氧化膜","originalKeyword":"氧化膜"}],"language":"zh","publisherId":"xyjsclygc201501041","title":"Zr-1Nb-XBi合金在400℃过热蒸汽中的耐腐蚀性能","volume":"44","year":"2015"},{"abstractinfo":"在Zr-0.70Sn-0.35Nb-0.30Fe(质量分数,％)合金成分基础上添加26～570 μg/g的S制备成实验合金,用SEM、TEM及其配置的EDS研究了S含量对合金中第二相成分及晶体结构的影响.结果表明:不加S的重熔合金中的第二相均为密排六方结构的Zr(Nb,Fe)2,添加S以后合金中出现了正交结构的Zr3Fe第二相,并随着S含量的增加,Zr3Fe的数量也相应增多;添加的S含量为190 μg/g时,合金中还出现了四方结构的Zr9S2第二相,并随着S含量的进一步增加,Zr9S2第二相的数量增多;同一成分合金中随第二相粒子尺寸的增大,第二相中的Nb/Fe比值逐渐降低.本研究制备的含S锆合金中,固溶在α-Zr基体中的最大S含量在26～190 μg/g之间,超过固溶含量的S以Zr9S2第二相析出,并没有进入其它第二相中.","authors":[{"authorName":"徐启迪","id":"14fc92d9-9648-4f4c-81f4-0fa0ef70efc1","originalAuthorName":"徐启迪"},{"authorName":"黄娇","id":"47fcfdf4-90b3-4819-9954-9e2f84efa5dd","originalAuthorName":"黄娇"},{"authorName":"姚美意","id":"5748a56a-e2ff-4242-83be-be7eba71ba06","originalAuthorName":"姚美意"},{"authorName":"彭胜","id":"46ecb0c2-f557-404e-9835-f756699f3158","originalAuthorName":"彭胜"},{"authorName":"张金龙","id":"72b23212-35df-4d9b-b00e-8045a741508e","originalAuthorName":"张金龙"},{"authorName":"彭剑超","id":"1b9283f6-f7b6-40c0-91a1-ff53f91ae69e","originalAuthorName":"彭剑超"},{"authorName":"周邦新","id":"f47407af-2602-4028-841b-7854384443f3","originalAuthorName":"周邦新"},{"authorName":"沈剑韵","id":"fb0a3d16-cc4b-4131-9225-d6634c7deffc","originalAuthorName":"沈剑韵"}],"doi":"","fpage":"122","id":"d914a67d-66be-4688-a169-620d99de11b3","issue":"1","journal":{"abbrevTitle":"XYJSCLYGC","coverImgSrc":"journal/img/cover/XYJSCLYGC.jpg","id":"69","issnPpub":"1002-185X","publisherId":"XYJSCLYGC","title":"稀有金属材料与工程"},"keywords":[{"id":"df153981-aa98-4993-b7f3-bb92434c5371","keyword":"锆合金","originalKeyword":"锆合金"},{"id":"b7318cbf-2ca3-4ebb-b4d0-032c335a5145","keyword":"显微组织","originalKeyword":"显微组织"},{"id":"76a7c64c-56ec-4c76-85a5-e4cf387273f1","keyword":"第二相","originalKeyword":"第二相"},{"id":"110f0d88-6517-4c76-993e-5e5c9398ef7b","keyword":"S","originalKeyword":"S"}],"language":"zh","publisherId":"xyjsclygc201501024","title":"添加S对Zr-Sn-Nb-Fe锆合金中第二相的影响","volume":"44","year":"2015"},{"abstractinfo":"

选用无织构的Zr-0.72Sn-0.32Fe-0.14Cr和 Zr-0.85Sn-0.16Nb-0.37Fe-0.18Cr合金大晶粒片状样品, 利用静态高压釜在500 ℃, 10.3 MPa过热蒸汽中进行500 h的腐蚀实验, 采用EBSD, SEM和TEM等方法研究了合金的显微组织以及氧化膜的厚度与金属晶粒表面取向的关系. 结果表明, Nb对第二相的晶体结构产生影响, Zr-0.72Sn-0.32Fe-0.14Cr合金中的第二相主要为fcc的Zr(Fe, Cr)2, 而Zr-0.85Sn-0.16Nb-0.37Fe-0.18Cr合金中的第二相为fcc和hcp的Zr(Nb, Fe, Cr)2; 2种合金均未出现疖状腐蚀, 并且不同金属晶粒取向上的氧化膜厚度没有明显差别, 即没有表现出腐蚀各向异性特征.

","authors":[{"authorName":"张骏","id":"d1c44e5b-a05e-40ee-aa55-8e098909a4ec","originalAuthorName":"张骏"},{"authorName":"姚美意","id":"2cd1c793-4a73-477f-a08d-39d4f5b962d4","originalAuthorName":"姚美意"},{"authorName":"冯炫凯","id":"cabe7a99-1b47-4d38-99fb-d0a35a121062","originalAuthorName":"冯炫凯"},{"authorName":"王志刚","id":"94bd5630-f2f3-40bc-8e6a-79bd7a7e0606","originalAuthorName":"王志刚"},{"authorName":"黄娇","id":"85b0780a-0ac9-4969-a64d-fbc67a405432","originalAuthorName":"黄娇"},{"authorName":"戴训","id":"6b7dcf21-eae6-44b4-8875-27890b3f6efc","originalAuthorName":"戴训"},{"authorName":"张金龙","id":"c423a414-11ff-4761-abb4-64a90d918209","originalAuthorName":"张金龙"},{"authorName":"周邦新","id":"ce5d045a-fa7b-43d8-acae-caccf9b85418","originalAuthorName":"周邦新"}],"categoryName":"Orginal Article","doi":"10.11900/0412.1961.2016.00043","fpage":"1565","id":"4fe4a112-f374-4959-aa2b-5ff2b0f88d4d","issue":"12","journal":{"abbrevTitle":"JSXB","coverImgSrc":"journal/img/cover/JSXB.jpg","id":"48","issnPpub":"0412-1961","publisherId":"JSXB","title":"金属学报"},"keywords":[{"id":"4a15b9c8-fbb1-4f23-b349-73396a626eb1","keyword":"锆合金,","originalKeyword":"锆合金,"},{"id":"fde5b164-483f-4b1a-8593-362accef99ea","keyword":"第二相,","originalKeyword":"第二相,"},{"id":"f4a3ab3d-52cc-4bd7-a867-1f147b369341","keyword":"耐腐蚀性,","originalKeyword":"耐腐蚀性,"},{"id":"dee9b8b9-fba1-4041-bdad-ff8e4b61d4bd","keyword":"腐蚀各向异性,","originalKeyword":"腐蚀各向异性,"},{"id":"67ff7363-427a-4d03-b456-c2b8093c741a","keyword":"显微组织","originalKeyword":"显微组织"}],"language":"zh","publisherId":"C20160043","title":"Zr-Sn-Fe-Cr-(Nb)合金在500 ℃过热蒸汽中的腐蚀各向异性研究*","volume":"52","year":"2016"},{"abstractinfo":"

为了研究锆合金中β-Nb第二相粒子的腐蚀行为,利用真空非自耗电弧炉熔炼了2种β-(Nb, Zr)第二相合金,分别为90Nb-10Zr合金和50Nb-50Zr合金,在静态高压釜中进行360 ℃、18.6 MPa、去离子水的腐蚀实验,利用带EDS的SEM和TEM分析腐蚀生成氧化膜的显微组织。结果表明：90Nb-10Zr合金与50Nb-50Zr合金的氧化产物都为非晶氧化物与晶态氧化物,其中90Nb-10Zr合金腐蚀生成的晶态氧化物为单斜结构的Nb2O5,而50Nb-50Zr合金腐蚀生成的晶态氧化物为四方结构的(Zr, Nb)O2。

","authors":[{"authorName":"陈兵","id":"b4f484e2-943b-4acc-8b70-f677ee879051","originalAuthorName":"陈兵"},{"authorName":"高长源","id":"bfdb6955-ad9a-4c9d-b049-97fc9dee513e","originalAuthorName":"高长源"},{"authorName":"黄娇","id":"b9b4c452-af09-4c75-96ed-5c68c39cf0fc","originalAuthorName":"黄娇"},{"authorName":"毛亚婧","id":"a0872cf3-81df-4adb-a631-e4be064c834a","originalAuthorName":"毛亚婧"},{"authorName":"姚美意","id":"e20339be-85f3-495e-9c9b-757f21b20c67","originalAuthorName":"姚美意"},{"authorName":"张金龙","id":"f3bada1e-d03c-42bd-8875-87a545b84ea7","originalAuthorName":"张金龙"},{"authorName":"周邦新","id":"bd6fddfd-99bf-4c6f-bb3e-ba6eee78c5d0","originalAuthorName":"周邦新"},{"authorName":"李强","id":"8ed17c8f-4b7a-4a0a-82b0-fba5a10a34ef","originalAuthorName":"李强"}],"categoryName":"Orginal Article","doi":"10.11900/0412.1961.2016.00389","fpage":"447","id":"dc3a56be-a5e4-404a-a0d1-7e2aeac9a6c1","issue":"4","journal":{"abbrevTitle":"JSXB","coverImgSrc":"journal/img/cover/JSXB.jpg","id":"48","issnPpub":"0412-1961","publisherId":"JSXB","title":"金属学报"},"keywords":[{"id":"39f97abc-edcf-44ab-8263-07944a852ee6","keyword":"锆合金","originalKeyword":"锆合金"},{"id":"daf031cb-4557-4c57-a43b-4acfada2b1e8","keyword":"β-(NbZr)合金","originalKeyword":"β-(NbZr)合金"},{"id":"64c5dd07-aca5-4fcb-adef-7add36f51042","keyword":"腐蚀","originalKeyword":"腐蚀"}],"language":"zh","publisherId":"0412-1961-2017-4-447","title":"β-(Nb, Zr)第二相合金在360 ℃去离子水中的腐蚀行为","volume":"53","year":"2017"},{"abstractinfo":"选用无织构的Zr-0.72Sn-0.32Fe-0.14Cr和Zr-0.85Sn-0.16Nb-0.37Fe-0.18Cr合金大晶粒片状样品,利用静态高压釜在500℃,10.3 MPa过热蒸汽中进行500 h的腐蚀实验,采用EBSD,SEM和TEM等方法研究了合金的显微组织以及氧化膜的厚度与金属晶粒表面取向的关系.结果表明,Nb对第二相的晶体结构产生影响,Zr-0.72Sn-0.32Fe-0.14Cr合金中的第二相主要为fcc的Zr(Fe,Cr)2,而Zr-0.85Sn-0.16Nb-0.37Fe-0.18Cr合金中的第二相为fcc和hcp的Zr(Nb,Fe,Cr)2;2种合金均未出现疖状腐蚀,并且不同金属晶粒取向上的氧化膜厚度没有明显差别,即没有表现出腐蚀各向异性特征.","authors":[{"authorName":"张骏","id":"194baaa8-07f8-4325-975a-0d9643a72318","originalAuthorName":"张骏"},{"authorName":"姚美意","id":"87703c05-499c-40d7-8165-7b12a7311a4f","originalAuthorName":"姚美意"},{"authorName":"冯炫凯","id":"0e994274-0a88-40f1-b07f-282607b0e731","originalAuthorName":"冯炫凯"},{"authorName":"王志刚","id":"6003a18b-2ed1-4d1d-b09b-309f3a4116f5","originalAuthorName":"王志刚"},{"authorName":"黄娇","id":"e493d027-af9d-4ace-aaa6-5dd8086abeea","originalAuthorName":"黄娇"},{"authorName":"戴训","id":"272b0868-37bf-4838-85c0-ba37de7a1671","originalAuthorName":"戴训"},{"authorName":"张金龙","id":"0cd54358-95dc-4974-8051-02d419c30816","originalAuthorName":"张金龙"},{"authorName":"周邦新","id":"574fe540-9efc-4807-a8c3-53a4ddeb8286","originalAuthorName":"周邦新"}],"doi":"10.11900/0412.1961.2016.00043","fpage":"1565","id":"9da258f0-bbce-43fa-b5e5-3795546d1828","issue":"12","journal":{"abbrevTitle":"JSXB","coverImgSrc":"journal/img/cover/JSXB.jpg","id":"48","issnPpub":"0412-1961","publisherId":"JSXB","title":"金属学报"},"keywords":[{"id":"941fd203-e2a8-474c-bff9-d11191b9703d","keyword":"锆合金","originalKeyword":"锆合金"},{"id":"9afbaa1c-1af7-4479-8a29-9696a7e5413b","keyword":"第二相","originalKeyword":"第二相"},{"id":"a48e332a-f3c9-44a1-b9bf-6d016dc8e2d6","keyword":"耐腐蚀性","originalKeyword":"耐腐蚀性"},{"id":"47117ee7-ffc3-46c1-aa8a-079745024cfd","keyword":"腐蚀各向异性","originalKeyword":"腐蚀各向异性"},{"id":"ff355d24-9f9c-4dd7-bb46-40ffe087dcc4","keyword":"显微组织","originalKeyword":"显微组织"}],"language":"zh","publisherId":"jsxb201612010","title":"Zr-Sn-Fe-Cr-(Nb)合金在500℃过热蒸汽中的腐蚀各向异性研究","volume":"52","year":"2016"},{"abstractinfo":"利用堆外静态高压釜实验研究了Zr-1Nb-xGe-yBi(x=0.05-0.1,y=0.2-0.4,质量分数,％)合金在400℃/10.3 MPa过热蒸汽和360℃/18.6 MPa去离子水中的耐腐蚀性能,利用高分辨透射电镜(HRTEM)和高分辨扫描电镜(HRSEM)研究了合金和合金腐蚀后氧化膜的显微组织.结果表明,合金中只存在β-Nb、ZrNbFe型和Zr3 Ge 3种第二相;在Zr-1 Nb合金中复合添加Ge和Bi可明显提高合金的耐腐蚀性能,其中Zr-1 Nb-0.05 Ge-0.3Bi合金的耐腐蚀性能相对较好,优于单独添加Ge的Zr-1 Nb-0.05Ge合金和单独添加Bi的Zr-1Nb-0.3 Bi合金.这进一步说明固溶在α-Zr中的Ge和Bi确实是改善Zr-1Nb-xGe-yBi合金耐腐蚀性能的主要原因.","authors":[{"authorName":"王志刚","id":"5465f9ce-12fa-4466-84c3-b4b02b876b4c","originalAuthorName":"王志刚"},{"authorName":"姚美意","id":"c96be24c-7b34-49ae-a2d7-2dc0bc0b4560","originalAuthorName":"姚美意"},{"authorName":"张骏","id":"7fc2324a-5cb3-443e-bc58-a3ad1f63cc5c","originalAuthorName":"张骏"},{"authorName":"孙风涛","id":"881fa47b-81b8-479a-b51f-24235cd5a8ec","originalAuthorName":"孙风涛"},{"authorName":"黄娇","id":"058e0498-c9ce-40ba-9ff9-71e2decd9ed0","originalAuthorName":"黄娇"},{"authorName":"张金龙","id":"0c29c123-d9ad-4cb8-ab62-10c19301b0ee","originalAuthorName":"张金龙"},{"authorName":"周邦新","id":"1efa02b5-a188-4272-bb68-3a6163898364","originalAuthorName":"周邦新"},{"authorName":"李强","id":"ee97a3cf-1bc0-464f-ae7e-7cffc0fa8a34","originalAuthorName":"李强"}],"doi":"","fpage":"102","id":"291c1dcb-dd9b-4949-8641-a457b7fb10b0","issue":"10","journal":{"abbrevTitle":"CLRCLXB","coverImgSrc":"journal/img/cover/CLRCLXB.jpg","id":"15","issnPpub":"1009-6264","publisherId":"CLRCLXB","title":"材料热处理学报"},"keywords":[{"id":"3b92536b-5ee7-4eb7-b62d-8ab81cafa2f8","keyword":"Zr-1Nb","originalKeyword":"Zr-1Nb"},{"id":"1bc9bb2f-bbc1-48fb-b503-4de2c35deb23","keyword":"Ge/Bi","originalKeyword":"Ge/Bi"},{"id":"e820f899-2d29-4b61-98a3-c832b67dbd3e","keyword":"第二相","originalKeyword":"第二相"},{"id":"29012810-ec1b-4c7a-9395-4f829c4155da","keyword":"显微组织","originalKeyword":"显微组织"},{"id":"46654384-f222-40e7-930e-e7e4857b3fe6","keyword":"耐腐蚀性能","originalKeyword":"耐腐蚀性能"}],"language":"zh","publisherId":"jsrclxb201610019","title":"Zr-1Nb-xGe-yBi合金的耐腐蚀性能","volume":"37","year":"2016"},{"abstractinfo":"SZA-6(Zr-(0.35～0.65)Sn-(0.35～0.65)Nb-(0.15～0.45)Fe-(0.01～0.02)Si)合金经β相区水淬后经500和580℃保温5～50 h,通过静态高压釜腐蚀实验研究样品在400℃、10.3 MPa过热蒸汽和360℃、18.6 MPa、0.01 mol/L LiOH水溶液中的腐蚀行为.并利用SEM、TEM和EDS研究合金的显微组织,包括第二相的尺寸、分布与种类.结果表明:经500℃退火处理的样品发生部分再结晶,经580℃退火处理的样品发生完全再结晶,退火时间对第二相尺寸的影响也不明显,退火时间对第二相尺寸的影响不明显;合金中的第二相主要是密排六方的Zr(Nb,Fe,Cr)2、四方的Zr5Si4以及正交的Zr3Fe;SZA-6合金在400℃、10.3 MPa过热蒸汽与360℃、18.6 MPa、0.01 mol/L LiOH水溶液中的耐腐蚀性能均随着退火温度的升高而变差,退火时间对SZA-6合金的耐腐蚀性能影响不大.","authors":[{"authorName":"张金龙","id":"c95e9c72-9d9f-4fdf-b37f-f8b3ba2be0f9","originalAuthorName":"张金龙"},{"authorName":"张骏","id":"213e33e6-ac3a-4456-bc8c-45392c45bd8f","originalAuthorName":"张骏"},{"authorName":"梁楠","id":"09756974-83a2-480f-a4a5-3419b943b4ce","originalAuthorName":"梁楠"},{"authorName":"曾奇锋","id":"665ddbca-d225-49bd-8f2e-ca26aa32b99b","originalAuthorName":"曾奇锋"},{"authorName":"袁改焕","id":"cb32fddc-e928-423c-b6a0-dc869651657c","originalAuthorName":"袁改焕"},{"authorName":"王练","id":"dffb9932-4879-4801-b800-889d22930c7b","originalAuthorName":"王练"},{"authorName":"高博","id":"9a69e48a-1528-4b39-84f0-556cf7abaef2","originalAuthorName":"高博"},{"authorName":"姚美意","id":"8f0a6822-3f00-4a0c-a21b-1e09c8017fc4","originalAuthorName":"姚美意"},{"authorName":"周邦新","id":"b4b58e8c-c195-4732-8c55-5b8c1884fa63","originalAuthorName":"周邦新"}],"doi":"","fpage":"97","id":"2646a7a1-ecb6-483d-a875-2a774241e055","issue":"1","journal":{"abbrevTitle":"ZGYSJSXB","coverImgSrc":"journal/img/cover/ZGYSJSXB.jpg","id":"88","issnPpub":"1004-0609","publisherId":"ZGYSJSXB","title":"中国有色金属学报"},"keywords":[{"id":"cb729879-98e6-4857-8fe6-1bb849199bd2","keyword":"锆合金","originalKeyword":"锆合金"},{"id":"3d96bf56-ff7c-4d32-9eff-ffc9091089fc","keyword":"第二相","originalKeyword":"第二相"},{"id":"f5c3b51b-576c-42c8-92c8-89f167f1e7e7","keyword":"退火工艺","originalKeyword":"退火工艺"},{"id":"4cb6ae5c-4355-4505-aa33-34e7b8356e68","keyword":"显微组织","originalKeyword":"显微组织"},{"id":"16d2a430-69da-43dc-a918-25430de6e4ac","keyword":"耐腐蚀性能","originalKeyword":"耐腐蚀性能"}],"language":"zh","publisherId":"zgysjsxb201701013","title":"退火工艺对Zr-Sn-Nb-Fe-Si合金耐腐蚀性能的影响","volume":"27","year":"2017"},{"abstractinfo":"本文研究了金纳米棒的局域表面等离子体共振效应在双光子聚合过程中的作用,即当激发光与金纳米棒表面等离子体共振波长相匹配时,会在金纳米棒表面产生很强的局域电磁场,从而引发双光子聚合.通过采用与金纳米棒表面等离子体共振波长相同的飞秒激光,在低于光刻胶聚合阈值的功率下照射含有金纳米棒的光刻胶,制备聚合物包覆金纳米棒的纳米复合材料.透射电子显微镜结果表明,当飞秒激光功率为0.6W、光斑直径为1.6 cm、照射时间为0.3s时,金纳米棒表面成功聚合上厚度为5 nm左右的聚合物.本研究在制备聚合物/金属纳米粒子方面提供了一种简单可行的方法,有望在纳米光子学、纳米传感器等新兴领域得到应用.","authors":[{"authorName":"张金龙","id":"2e409426-0b67-4378-8d03-6b36cf8b5664","originalAuthorName":"张金龙"},{"authorName":"郑美玲","id":"f318da2e-a724-42a4-b25f-19c928a7913d","originalAuthorName":"郑美玲"},{"authorName":"金峰","id":"3c576466-8435-4167-b549-15fe1fa0bb83","originalAuthorName":"金峰"},{"authorName":"董贤子","id":"0571f439-9a01-4c6d-a0db-0504b3ddeb3a","originalAuthorName":"董贤子"},{"authorName":"陈述","id":"199366a7-c08a-4280-a311-390ddbb24ed5","originalAuthorName":"陈述"},{"authorName":"赵震声","id":"2badc914-368b-42cb-831b-1bb1fb3b93b0","originalAuthorName":"赵震声"},{"authorName":"段宣明","id":"4739bce0-187d-4113-b0d8-82909a093733","originalAuthorName":"段宣明"}],"doi":"10.7517/j.issn.1674-0475.2014.03.267","fpage":"267","id":"7ec8f5a2-98df-4631-8683-8c9e3dea957e","issue":"3","journal":{"abbrevTitle":"YXKXYGHX","coverImgSrc":"journal/img/cover/YXKXYGHX.jpg","id":"74","issnPpub":"1674-0475","publisherId":"YXKXYGHX","title":"影像科学与光化学 "},"keywords":[{"id":"f1eb22d5-823a-4f69-830c-d085d396557d","keyword":"金纳米棒","originalKeyword":"金纳米棒"},{"id":"bbf82f3d-bd47-441b-8924-5c6ca21fcc46","keyword":"飞秒激光","originalKeyword":"飞秒激光"},{"id":"e5b26258-228b-4f64-b5da-446d3c14e01b","keyword":"双光子聚合","originalKeyword":"双光子聚合"},{"id":"fea2ea9b-c53c-4906-b129-03c5182f8d06","keyword":"金属/聚合物纳米复合材料","originalKeyword":"金属/聚合物纳米复合材料"}],"language":"zh","publisherId":"ggkxyghx201403005","title":"局域表面等离子体共振辅助的金纳米棒/聚合物纳米复合材料的双光子聚合","volume":"32","year":"2014"},{"abstractinfo":"通过单因素试验、正交试验优选出一种适合氯化钾镀锌层三价铬黑色钝化的工艺，研究了钝化液组分和钝化条件对钝化膜性能的影响。采用醋酸铅点滴试验、电化学测试、扫描电子显微镜对三价铬黑色钝化膜的耐蚀性及表面形貌进行了检测。结果表明：镀锌层经三价铬黑色钝化后再进行封闭处理，不仅外观乌黑油亮、膜层均匀，而且其耐蚀性也显著提高。","authors":[{"authorName":"柯昌美","id":"9a5275d1-d5a3-4cf5-ba1c-c17d093a7bcc","originalAuthorName":"柯昌美"},{"authorName":"周黎琴","id":"7ef1f26e-5a55-428d-aa7a-de82cf449370","originalAuthorName":"周黎琴"},{"authorName":"汪振忠","id":"bba8f455-ba72-4eea-83e2-00dcecb9b583","originalAuthorName":"汪振忠"},{"authorName":"张金龙","id":"76bb8650-2adc-4b24-add9-8f0f5317148a","originalAuthorName":"张金龙"},{"authorName":"王茜","id":"aa838488-1e8e-411d-aac1-849fbc078d90","originalAuthorName":"王茜"},{"authorName":"张利玉","id":"2d35a7f5-3865-4b70-ab45-72c90300d377","originalAuthorName":"张利玉"},{"authorName":"陈红祥","id":"ad78cf68-ffdc-4a27-9bc6-17a8e435816b","originalAuthorName":"陈红祥"}],"doi":"","fpage":"28","id":"80f3aef3-b891-4fb3-a57c-c3541b6bac24","issue":"2","journal":{"abbrevTitle":"CLBH","coverImgSrc":"journal/img/cover/CLBH.jpg","id":"7","issnPpub":"1001-1560","publisherId":"CLBH","title":"材料保护"},"keywords":[{"id":"166214e0-407b-4bcc-ac85-f7029d2d4fa3","keyword":"黑色钝化","originalKeyword":"黑色钝化"},{"id":"1796d000-85b0-4697-9879-9cfbc245f82c","keyword":"三价铬","originalKeyword":"三价铬"},{"id":"e6e99ff8-d93f-4884-afc4-63e5e5f21f61","keyword":"氯化钾体系","originalKeyword":"氯化钾体系"},{"id":"a63a489a-e714-4fa2-a5e2-e3443d43d586","keyword":"镀锌层","originalKeyword":"镀锌层"},{"id":"201f5f6b-ad56-48e9-9434-c1bb1dc78dd9","keyword":"耐蚀性","originalKeyword":"耐蚀性"}],"language":"zh","publisherId":"clbh201202012","title":"氯化钾镀锌层三价铬黑色钝化工艺","volume":"45","year":"2012"}],"totalpage":27,"totalrecord":266}