建立Al2O3热压陶瓷激光辅助切削准稳态传热模型,采用有限差分方法,利用MATLAB软件,结合材料的受热软化特性,计算得到工件的温度场分布,并由此确定不同激光参数(激光功率、光束移动速度和光斑半径)下的切削深度.模拟计算发现工件表面等温线为卵圆形,横截面呈抛物线型,纵截面呈对称分布形式,而计算确定工件横、纵截面1 000 K等温线所对应的深度值为加工时合适的切削深度;通过对比分析发现:不同参数下温度场计算确定的切削深度值与实验值较吻合,采用较高的激光功率、较低的激光移动速度和工件表面受辐照激光光斑半径有利于切削区域材料的充分软化,从而获得较大的切削深度.
参考文献
| [1] | 叶邦彦.加热切削及其发展[J].机械开发,1995(04):10-12. |
| [2] | J. C. Rozzi;F. E. Pfefferkorn;F. P. Incropera;Y. C. Shin .Transient thermal response of a rotating cylindrical silicon nitride workpiece subjected to a translating laser heat source, Part I: Comparison of surface temperature measurements with theoretical results[J].Journal of heat transfer: Transactions of the ASME,1998(4):899-906. |
| [3] | J. C. Rozzi;F. P. Incropera;Y. C. Shin .Transient thermal response of a rotating cylindrical silicon nitride workpiece subjected to a translating laser heat source, Part II: Parametric effects and assessment of a simplified model[J].Journal of heat transfer: Transactions of the ASME,1998(4):907-915. |
| [4] | Jay C. Rozzi;Frank E. Pfefferkorn .Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics[J].Journal of manufacturing science and engineering,2000(4):666-670. |
| [5] | Frank E. Pfefferkorn;Frank P. Incropera;Yung C. Shin .Surface Temperature Measurement of Semi-Transparent Ceramics by Long-Wavelength Pyrometry[J].Journal of heat transfer: Transactions of the ASME,2003(1):48-56. |
| [6] | Frank E. Pfefferkorn;Yung C. Shin;Yinggang Tian;Frank P. Incropera .Laser-Assisted Machining of Magnesia-Partially-Stabilized Zirconia[J].Journal of manufacturing science and engineering,2004(1):42-51. |
| [7] | 王慧艺,李从心,阮雪榆.激光辅助切削温度场的三维有限元仿真[J].上海交通大学学报,2001(01):98-101. |
| [8] | 王扬,马丽心,谢大纲,韦随心.陶瓷材料激光加热辅助切削温度场分析[J].哈尔滨工业大学学报,2001(06):785-788. |
| [9] | 马丽心,王扬,谢大纲,杨立军,刘璇.冷硬铸铁激光加热辅助切削实验研究[J].哈尔滨工业大学学报,2002(02):228-231. |
| [10] | 王扬,杨立军,齐立涛.Al2O3颗粒增强铝基复合材料激光加热辅助切削的切削特性[J].中国机械工程,2003(04):344-346. |
| [11] | 利用CO2高能激光辅助干式切削GH761试验研究[J].辽宁工程技术大学学报（自然科学版）,2005(05):739-741. |
| [12] | 陈沛,金湘中.激光辅助切削温度场的数值模拟[J].机械制造,2005(12):32-34. |
| [13] | CHANG C W;KUO C P .An investigation of laser-assisted machining of Al2O3 ceramics planning[J].International Journal of Machine Tools and Manufacture,2007,47:452-461. |
| [14] | Chih-Wei Chang;Chun-Pao Kuo .Evaluation of surface roughness in laser-assisted machining of aluminum oxide ceramics with Taguchi method[J].International Journal of Machine Tools & Manufacture: Design, research and application,2007(1):141-147. |
| [15] | 李力钧.现代激光加工及其装备[M].北京:北京理工大学出版社,1993:130-135. |
| [16] | 李建保;黄勇 .新型陶瓷刀具材料的研究与开发[J].现代技术陶瓷,1993,1:7-13. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%