研究了时效处理对轧制Al-5 Fe基合金组织和断口形貌的影响.结果表明:轧制Al-5Fe基合金经过固溶时效处理后,在基体中能析出Mg2Si球状相及块状的Al-Si-Mn-Fe相和Al-Si-Mn-Fe-Mg相,随着时效时间的增加,β相在晶界上不断地析出,吸收了它附近的溶质和空位原子,形成了无析出带,使合金性能降低.断口分析表明,时效后合金的断裂方式均为韧窝断裂和沿晶断裂的混合型,断口中心的硬质粒子是断裂的发源.
参考文献
| [1] | Zandergen H W;Andersen S J;Jansen J .Structure de-termination of Mg5 Si6 particles in Al by dynamic electron diffraction studies[J].SCIENCE,1997,277(5330):1221-1221. |
| [2] | Starink M J;Wang P;Sinclair I et al.Microstructure and strengthening of Al-Li-Cu-Mg alloys and MMCS:Ⅱ.Modeling of yield strength[J].ACTA MATERIALIA,1999,47(14):385-3868. |
| [3] | Ravi C;Wolverton C .First-principles study of crystal structure and stability of Al-Mg-Si-(Cu) precipitates[J].Acta Materialia,2004,52(04):213-4227. |
| [4] | Gupta AK.;Court SA.;Lloyd DJ. .Precipitation hardening in Al-Mg-Si alloys with and without excess Si[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):11-17. |
| [5] | Miao WF;Laughlin DE .Precipitation hardening in aluminum alloy 6022[J].Scripta materialia,1999(7):873-878. |
| [6] | G.A.Edwards;K.Stiller;G.L.Dunlop .The precipitation sequence in Al-Mg-Si alloys[J].Acta materialia,1998(11):3893-3904. |
| [7] | A. Gaber;M.A. Gaffar;M.S. Mostafa .Precipitation kinetics of Al-1.12 Mg2Si-0.35 Si and Al-1.07 Mg_2Si-0.33 Cu alloys[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2007(1/2):167-175. |
| [8] | 李润霞,李荣德,何立子,李晨曦,胡壮麒.可热处理铸造Al-Si系合金时效行为研究[J].稀有金属材料与工程,2004(02):171-175. |
| [9] | 戴晓元,夏长清,刘昌斌,古一.固溶处理及时效对7xxx铝合金组织与性能的影响[J].材料热处理学报,2007(04):59-63. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%