采用粘性流体的运动微分方程分析工作介质在锥模中的挤压流动,通过分析工作介质的粘度对热静液挤压的影响,指出了合理的选择工作介质的成分使得粘度适宜,可以使热静液挤压力最小,而且能够避免挤压件缺陷的产生.挤压介质的粘度是关系到坯料变形流动的润滑性能及挤压变形流动性能的关键.在此基础上,给出了挤压介质的粘度的数学关系式,为热静液挤压工艺奠定重要的理论基础.
参考文献
| [1] | German R M;Bourguignon L1 .Analysis of High Tungsten Content Heavy Alloys[J].Powder Metallurgy in Defense Technology,1985,6:117-131. |
| [2] | Walsh J M;Donachie M J .On a New Intermetallic Phase in the Nickel-Tungsten System[J].Metallurgical and Materials Transactions,1973,4(12):2854-2856. |
| [3] | 陈社伟.Study of High Temperature Deformation and the Process for P/M 95W-5 (Ni/Fe/Co) Alloy[J].Harbin:Harbin Institute of Technology,1990 |
| [4] | German R M .Microstructure Limitations of High Tungsten Content Heavy Alloys[J].Journal of Metals,1985,37(08):36-39. |
| [5] | Raynor G V;Rivlin V G .Critial Evaluation of Constitutions of Certain Ternary Alloys Containing Iron,Tungsten,and a Third Metal[J].International Metals Reviews,1981,4:213-236. |
| [6] | 梁国宪;王尔德 .Influence of Hot Extrusion on Microstructure and Mechanical Properties of Tungsten Based Heavy Alloy[J].Materials Science and Technology,1996,12:1032-1034. |
| [7] | 程兴旺,王富耻,王鲁,李树奎.垂直侵彻钢靶过程中钨合金壳体破坏机理研究[J].稀有金属材料与工程,2002(06):427-431. |
| [8] | 郭银运.Study of Hot Hydrostatic Extrusion Process of 95W-5 ( Ni/Fe/Co ) Alloy[J].Harbin:Harbin Institute of Technology,1992:103-109. |
| [9] | 黄继华,曹智威,周国安.高密度钨合金性能的计算机数值模拟研究--钨含量对合金性能的影响[J].稀有金属材料与工程,1998(06):344-347. |
| [10] | 范景莲,黄伯云,汪登龙,曲选辉,张传福.纳米钨合金粉末的制备技术[J].稀有金属材料与工程,2001(06):401-405. |
| [11] | 周光垌;严宗毅.流体力学[M].北京:高等教育出版社,2001:106-206. |
| [12] | Fracture Analysis Write Group.Analysis for Metals Fracture[M].上海:上海交通大学出版社,1976 |
| [13] | Iron.A Collection of Illustrative Plates Atlas for Fracture Analysis Based Difficult Molten Metals[M].北京:科学出版社,1978 |
| [14] | Lu Yan吕炎.The Control for Microstructure and Capability of the Forging[M].北京:国防工业出版社,1988:92-93. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%