Fatigue Damage Mechanism of Oil Film Bearing Sleeve

钢铁研究学报(英文版), 2007, 14(1): 60-68.

^1, , ^2, , ^3, , ^4,

1.School of Mechanical and Electrical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, Shanxi, China

2.School of Mechanical and Electrical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, Shanxi, China;School of Mechanical Design and Automation, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China

3.School of Mechanical Design and Automation, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China

4.School of Mechanical and Electrical Engineering, Taiyuan University of Science and Technology, Taiyuan 030024, Shanxi, China

基金项目: 国家自然科学基金(50575155)

Fatigue Damage Mechanism of Oil Film Bearing Sleeve

Keywords： oil film bearing

With the rapid development of the steel industry, to keep pace with the current trend of high speed, continuous, and large-scale production that focuses on automation and high levels of efficiency, many state-owned steel companies are being equipped with oil film bearings. Through long-term on-spot inspection and research on the fatigue failure of oil film bearing, three segments of annulated fatigue breakage were found axially along the inner surface of the bearing sleeve. In order to elucidate the reason for the three-segment annulated damage under rolling load, numerical boundary element method was adopted to analyze the contact behaviors between the sleeve and rollneck. Failure mechanism was discussed in detail, the distributions of contact stress were analyzed, and the service lives of the sleeve for different positions on the inner surface were quantitatively described, which provided an effective means to decrease wear and adhesive damage of the sleeve and to increase the load capacity of oil film bearing and its service life as well.

参考文献

[1]	GUO Xi-quan;LI Shu-qing.Oil-Film Bearing of Modern Large-Scale Rolling Mill[M].北京:机械工业出版社,1992
[2]	GAO Cai-qiao;LIU Jia-jun.Adhesive and Fatigue Wear of Materials[M].北京:机械工业出版社,1989
[3]	CHENG Wei-wen .Experimental and Numerical Study of Multi-Body Contact System With Roller Bearing-Part Ⅱ[J].Semi-Finite Element Analysis and Optical Design of Housing,1996,36(01):166-172.
[4]	SHEN Guang-xian;HUANG Qing-xue.The BEM to Contact Problems in 3-D Elasticity With Friction[A].北京,1991:123-125.
[5]	CHEN Wu;ZHU Fan;LUO Jing .Computational Finite Element Analysis and Optimal Design for Multi-Body Contact System[J].Computer Methods in Applied Mechanics and Engineering,1988,71:31-39.
[6]	LAN Xing-chang .Boundary Element Method for Three-Dimensional Elastic Contact Boundary Element Method[D].秦皇岛:燕山大学,1988.
[7]	SHEN Guang-xian.Boundary Element Method[M].北京:机械工业出版社,1998
[8]	QIN Zhang-zhi .FEM-BEM Coupling Method for 3D Elasto-Plastic Analysis[D].北京:清华大学,1984.
[9]	WEN Wei-dong .Research on BEM for Contact Problems[D].南京:南京航空航天大学,1992.

上一张下一张

计量

下载量()
访问量()

作者相关

在本站搜索
在百度学术搜索
在万方数据库搜索
在CNKI搜索

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

Fatigue Damage Mechanism of Oil Film Bearing Sleeve

参考文献