本文基于网络法对典型的燃气轮机燃烧室建立了模型,并同实验数据或计算分析结果进行比较,取得较为满意结果.其中,当简单模型不能满足预测高压射流反应时,提出了一种新的双入口双全混反应器模型.同时,部分混合反应器模型对该种工况也进行了成功模拟.除此之外,针对不同典型的燃烧室建立了相应的网络模型,并取得了满意的结果.
Models based on network are established for typical combustors,and their simulated resuits are reasonable when compared with experimental data or other numerical results.When the simple models cannot be well applied to a high-pressure jet-stirred reactor,a new 2-inlet-2-PSR model is developed.At the same time,a partially stirred reactor model well simulates the condition,too.Furthermore.the models for two different combustors are also established,and the simulated results are in good agreement with available references.
参考文献
| [1] | Bengtsson K U M;Benz P;Schaeren R et al.NO_x Formation in Lean Premixed Combustion of Methane in a High-Pressure Jet-Stirred Reactor[J].Proceedings of the Combustion Institute,1998,27:1393-1401. |
| [2] | Rutar T;Malte P C .NO_x Formation in High-Pressure Jet-Stirred Reactors with Significance to Lean-Premixed Combustion Turbines.[ASME Paper 2001-GT-0067.][R].,2001. |
| [3] | Rutar T .NO_x and CO Formation for Lean-Premixed Methane-Air Combustion in a Jet-Stirred Reactor Operated at Elevated Pressure[D].Washington:University of Washington,2000. |
| [4] | Zhu M;Dowling A P;Bray K N C .Study of Flame Transfer Function with Three Dimensional Calculations[ASME Paper 2003-GT-38409][R].,2003. |
| [5] | 张昊,朱民,张志军.分级预混燃烧的稳定性[J].动力工程,2006(02):221-228. |
| [6] | 胡长松 .基于网络法的燃气轮机燃烧过程计算与分析[D].北京:清华大学,2008. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%