利用接触元双坐标法(CEM)建立了双AS-U-Roll系统森吉米尔轧机轧制过程中轧件及辊系变形行为的CEM函数矩阵,开发了SM4SM软件.应用SM4SM分析了第一中间辊锥角、锥度长度和窜辊长度对轧件截面形状和轧件边部减薄控制的影响.研究结果对冷轧过程控制轧件板形和边部减薄具有重要的参考价值.
参考文献
| [1] | M. P. F. Sutcliffe;P. J. Rayner .Experimental measurements of load and strip profile in thin strip rolling[J].International Journal of Mechanical Sciences,1998(9):887-899. |
| [2] | Cheng Lu;A. Kiet Tieu;Zhengyi Jiang .A design of a third-order CVC roll profile[J].Journal of Materials Processing Technology,2002(0):645-648. |
| [3] | D A S Denshpande;K S Murthy .Computer analysis for the prediction of a strip profile in cold rolling[J].Journal of Materials Processing Technology,1997,63:712-717. |
| [4] | 徐建忠,张军,张凤琴,刘相华,王国栋,何晓明,巴力颖.工作辊弯辊力对热轧带钢凸度的影响[J].钢铁研究学报,2003(05):23-27. |
| [5] | 肖宏,谢红飙,张国民.PC轧机轧制过程耦合数值模拟研究[J].工程力学,2005(03):216-219,215. |
| [6] | T T Edwin;U Langer .Nonlinear finite element analysis of the edge drop effect for cold rolling[J].Computers & Structures,1985,21(1/2):113-119. |
| [7] | Z. Y. Jiang;A. K. Tieu;X. M. Zhang .Finite element simulation of cold rolling of thin strip[J].Journal of Materials Processing Technology,2003(1/3):542-547. |
| [8] | Pierre Montmitonnet .Hot and cold strip rolling processes[J].Computer Methods in Applied Mechanics and Engineering,2006(48/49):6604-6625. |
| [9] | Hai-liang YU;Xiang-hua LIU;Gyoo-Taek LEE .Contact Element Method with Two Relative Coordinates and Its Application to Prediction of Strip Profile of a Sendzimir Mill[J].ISIJ International,2007(7):996-1005. |
| [10] | H L Yu;X H Liu;G T LEE et al.Analysis of rolls deflection for Sendzimir mill using numerical method[J].Journal of Manufacturing Science and Engineering,2008,130(01):1-7. |
| [11] | 潘纯久.二十辊轧机及高精度冷轧钢带生产[M].北京:冶金工业出版社,2003 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%