采用真空热压原位合成法制备Al3Ti增强Mg-Al基复合材料。研究了烧结工艺对复合材料显微结构的影响。探讨了Al3Ti的原位合成机制,提出了Ti和Al的微观反应模型。采用XRD、SEM等方法分析了复合材料的相组成及微观结构。结果表明,Mg-Al基复合材料组织致密,原位合成增强相Al3Ti颗粒在基体中均匀分布,尺寸为0.5～2.0μm,与基体界面紧密结合,同时存在少量残余的Ti和中间相Al-Ti。
In-situ Al3Ti reinforced Mg-Al matrix composites were prepared by vacuum hot-pressing.The mechanism of in-situ synthesized Al3Ti was discussed and a model of micro structural reaction between Ti and Al was brought forward.Effects of sintering schedules on microstructures of composites were researched by methods,such as XRD and SEM.Results indicate that Mg-Al matrix composites are dense in structure,while uniformly distributed in-situ Al3Ti particulates with the size of 0.5~2.0 μm are combined closely with Mg-Al matrix.Small quantities of remnant Ti and intermediate phases Al-Ti also exist.
参考文献
| [1] | Mordike B L, Ebert T. Magnesium. Properties - applications - potential [J]. Materials Science & Engineering A, 2001, 302(1): 37-45 |
| [2] | 李淑波,郑明毅,甘为民,等.SiCw/AZ91镁基复合材料及AZ91镁合金的高温变形行为[J].复合材料学报,2005,22(3):103-108. |
| [3] | Ye H Z, Liu Xingyang. Review of recent studies in magnesium matrix composites [J]. Journal of Materials Science, 2004, 39(20): 6153-6171. |
| [4] | 李维学,张胡军,戴剑锋,等.碳纳米管增强镁基复合材料热残余应力的有限元分析[J].复合材料学报,2011,28(1):166-171. |
| [5] | 田君,李文芳,韩力发,等.A1203-Si02/AZ91D镁基复合材料蠕变本构方程[J].复合材料学报,2010,27(6):135-140. |
| [6] | Tjong S C, Ma Z Y. Microstructural and mechanical characteristics of in situ metal matrix composites[ J ]. Materials Science ~ Engineering R, 2000, 29 (4) : 49-113. |
| [7] | Matin M A, Lu L, Gupta M. Investigation of the reactions between boron and titanium compounds with magnesium [J]. Scripta Materialia, 2001, 45(4):479-486. |
| [8] | 郗雨林,柴东朗,王耀玮.低温反应自熔法原位合成MgO颗粒增强镁基复合材料[J].稀有金属材料与工程,2007,36(3):554-558. |
| [9] | Chen L Q, Dong Q, Zhao M J, et al. Synthesis of TiC/Mg composites with interpernetrating networks by in situ reactive infiltration process [J]. Materials Science Engineering A, 2005, 408(1/2): 125-130. |
| [10] | Wang H Y, Jiang Q C, Li X L, et al. In situ synthesis of TiC/Mg composites in molten magnesium [J ]. Scripta Materialia, 2003, 48(9): 1349-1354. |
| [11] | 王慧远.原位颗粒增强镁基复合材料的制备[D].吉林:吉林大学,2004. |
| [12] | 梅楹煜.原位反应制备Mg2Si/AM60镁基复合材料组织性能的研究[D].江西:南昌大学,2008. |
| [13] | 于宏宝.细晶TiAl基合金制备及组织和性能研究[D].哈尔滨:哈尔滨工业大学,2008. |
| [14] | Kattner U R, Boettinqer W J. Thermodynamic calculation of the ternary Ti - A1 - Nb system [J]. Materials Science Engineering A, 1992, 152(1/2): 9-17. |
| [15] | 梁英教,车荫昌.无机物热力学数据手册[M].沈阳:东北大学出版社,1993:254-255. |
| [16] | Lathabai S, Lloyd P G. The effect of scandium on the microstructure, mechanical properties and weldability of a cast AI-Mg alloys [J]. Acta Materialia, 2002, 50(17): 4275- 4292. |
| [17] | Zeng F H, Xia C Q, Gu Y. The 430 ℃ isothermal section of the A1 - 4Mg - Sc - Zr quaternary system in the A1 rich range [J]. Journal of Alloys and Compounds, 2004, 363(1/2): 175-181. |
| [18] | 山口正治,属越佑吉.金属间化合物[M].丁树深,译.北京:科学出版社,1991:80-96 |
| [19] | Lu L, Lai M O, Toh Y H, et al. Structure and properties of Mg - A1 - Ti - B alloys synthesized via mechanical alloying [J]. Materials Science Engineering A, 2002, 334 (1/2) : 163 - 172. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%