本文报道采用高温熔融粘合工艺和电晕注极方法制备了由多孔PTFE/FEP复合而成的空间电荷驻极体压电膜.根据Kacprzyk等人提出的复合驻极体膜的压电模型,结合等温表面电位衰减和压电系数衰减测量结果,研究了制备工艺对复合膜压电活性的影响.结果表明:压电效应的大小不仅取决于捕获在材料中电荷密度的大小,还与被捕获电荷在材料中的存在形式和分布有关.
参考文献
| [1] | Hayakawa R;Wada Y .[J].Advances in Polymer Science,1973,11:1. |
| [2] | Neugschwandtner GS.;Bauer-Gogonea S.;Bauer S.;Paajanen M.;Lekkala J.;Schwodiauer R. .Piezo- and pyroelectricity of a polymer-foam space-charge electret[J].Journal of Applied Physics,2001(8):4503-4511. |
| [3] | Kacprzyk R;Motyl E;Gajewski J B;A Pasternak .[J].Journal of Electrostatics,1995,35:161. |
| [4] | 陈钢进,韩高荣,RUDI Danz,Burkhard Elling.Electret Characteristics of Hybrid Films Consisting of Porous Polytetrafluoroethylene and Teflon Fluoroethylenepropylene with Corona Charging[J].中国物理快报(英文版),2002(12):1856-1858. |
| [5] | Winstle H .Introduction to electrets[J].Journal of the Acoustical Society of America,1973,52:1578-1588. |
| [6] | Xia Z F;Wedel A;Danz R.The excellent charge storage stability of porous polytetrafluoroethylene (PTFE) film electrets[A].Piscataway:IEEE Service Center,1999:23-26. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%