分别采用传统三点短梁剪切法和改进三点短梁剪切法对扩张段所采用的针剌C/C复合材料进行了层间剪切强度测试试验.结果显示,改进的三点短梁剪切法很好地解决了传统三点短梁剪切法的应力集中现象,试件更容易发生层间剪切破坏;改进的三点短梁剪切法的测试结果一般要大于传统三点短梁剪切法的,更接近材料实际水平.对改进的短梁剪切法试验破坏试样进行电镜扫描分析,指出了发生破坏的薄弱点,提出了要提高材料的层间剪切性能可合理优化网胎层厚度的改进建议..
参考文献
| [1] | 苏红,张小虎,郑金煌,邹武,李崇俊,初琳.SRM用大型整体针刺准三向C/C扩张段制造技术研究[C].第六届全国新型炭材料学术研讨会论文集,2003:295-300. |
| [2] | Ellis R A;Lee J C;Payne F M.Development of a carbon-carbon translating nozzle extension for the RL10B-2 liquid rocket engine[A].France:AIAA,1997:2672. |
| [3] | Le M O.Ariane 5 solid rocket motor nozzle design[A].Orlando,FL,America,1990:2083. |
| [4] | Broquere B H.Carbon/carbon nonzzle exit cones:SEP' s experience and new developments[A].America:AIAA,1997:2674. |
| [5] | 邱惠中;吴志红.国外航天材料的新进展[J].宇航材料工艺,1997(04):5. |
| [6] | Alain Lacombe;Thierry Pichon;Marc lacoste.3D carbon-carbon composites are revolutionizing upper stage liquid rocket engine performance by allowing introduce-tion of large nozzle extension[A].America:AIAA,2009:2678. |
| [7] | Russell A E.Testing of Novoltex 3-D carbon-carbon integral throat and exit cones[A].America:AIAA,1988:3361. |
| [8] | Ming Xie;Donald F A .Study of three-and four-point shear testing of unidirect-ional composite materials[J].COMPOSITES,1995,26(09):653. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%