综述了铝合金强应变组织细化技术,以及通过控制淬火、时效、预拉伸工艺,减小残余应力的研究现状.指出开发利用多向锻造后轧制的复合强应变,以及通过优化淬火、时效、预拉伸工艺是制备高性能铝合金超厚板的关键技术.
参考文献
| [1] | Heinz A;Haszler A;Keidel C et al.Recent development in aluminum alloys for aerospace applications[J].Materials Science and Engineering,1999,280:102. |
| [2] | Forrestal M J;Luk V K;Brar N S .Perforation of aluminum armor plates with conical-nose projectiles[J].Mechanics of Materials,1990,10:97. |
| [3] | Moldenhauer S;van der Lugt J;Hoogland H et al.Recent improvement in high strenght thick AA7050-Plate[J].Materials Science Forum,2000,331:1101. |
| [4] | Sainfort P;Sigli C;Raynaud G M et al.Structure and property control of aerospace alloys[J].Materials Science Forum,1996,242:25. |
| [5] | 航空航天材料咨询研究组.航空航天材料咨询报告[M].北京:国防工业出版社,1999 |
| [6] | Valiey R Z;Korznikov A V;Mulyukoy R R .Structure and properties of ultra-fine grained materials produced by severe plastic deformation[J].Materials Science and Engineering,1993,A168:141. |
| [7] | Terence G. Langdon;Minoru Furukawa;Zenji Horita;Minoru Nemoto .Using intense plastic straining for high-strain-rate superplasticity[J].JOM,1998(6):41-45. |
| [8] | Zenji Horita;Smith David J;Minoru Furukawa et al.Evolution of grain boundary structure in submicrometergrained A1-Mg alloy[J].Materials Characterization,1996,37:285. |
| [9] | Chen W N;Ferguson D;Ferguson H .Severe plastic deformation techniques[J].金属学报(英文版),2000(13):242. |
| [10] | Richert M;Liu Q;Hansen H .Microstructural evolution over a large strain range in aluminum deformed by cyclicextrusion-compression[J].Materials Science and Engineering,1999,A260:275. |
| [11] | Liu Zuyan;Liang Guoxian;Wang Erde .Effect of equal-channel angular pressing on structure of al alloy 2024[J].Transactions of Nonferrous Metals Society of China,1997(2):160-165. |
| [12] | ZHANG Xin-ming,SONG Min,ZHOU Zhuo-ping,ZENG Su-min.Microstructures and mechanical properties of 2014 aluminium alloy forgings made by a new process[J].中国有色金属学会会刊(英文版),2000(02):139-143. |
| [13] | SONG Min,ZHANG Xin-ming,YANG Yang,ZHOU Zhuo-ping,ZENG Su-min.Heat-treatment of 2014 aluminium alloy forgings with intense strain[J].中国有色金属学会会刊,2000(06):721. |
| [14] | Markushev M V;Bampton C C;Murashkin M Yu.Structure and properties of ultra-fine grained aluminum alloys proced by severe plastic deformation[J].Materials Science and Engineering,1997:927. |
| [15] | Zhang Hui;Lin Gao-yong;YANG Li bin et al.Manufacturing of aluminum alloy ultra-thick plates by a combination deformation model of multidirectional forging and subsequent rolling[J].Transactions of Nonferrous Metals Society of China,2001,11 |
| [16] | Andrey Belyakov;Taku Sakai;Hiromi Miura .Finegrained structure formation in austenitic stainess steel under multiple deformation at 0.5Tm[J].Materials Transactions,2000,41:476. |
| [17] | Chia E H;McQueen H J.Microstructural Control in Aluminum Alloy: Deformation[J].Recovery and Recrystallization PA TMS New York,1985 |
| [18] | Rasouli Yazdi S;Retraint D;Lu J .Study of throughthickness residual stress by numerical and experimental techniques[J].Journal of Strain Analysis,1998,33:449. |
| [19] | Tanner DA.;Robinson JS. .Residual stress prediction and determination in 7010 aluminum alloy forgings[J].Experimental Mechanics,2000(1):75-82. |
| [20] | Jeanmart P;Bouvaist J .Finite element calculation and measurement of thermal stress in quenched plates of high strength 7075 aluminum alloy[J].Materials Science and Technology,1985,1:756. |
| [21] | Smith D J .Assessment of the Sachs method for measuring residual stresses in cold worked fastener holes[J].Journal of Strain Analysis for Engineering Design,1998,33:263. |
| [22] | Baradie Z M;Sayed M .Effect of double thermomechanical treatments on the properties of 7075 A1 Alloy[J].Journal of Materials Processing Technology,1996,62:76. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%