采用等温差示扫描量热法（DSC）研究端羟基超支化聚酯改性纳米氧化钇(Y2O3-g-HBPE)对环氧树脂(EP)等温固化行为的影响，采用Kamal方程分析体系的固化动力学。结果表明：EP及EP/Y2O3-g-HBPE体系的固化机理均含有自催化机理；Y2O3-g-HBPE的加入使环氧树脂体系的固化速率常数k1、k2增大，同时使固化活化能增大。
The effect of hyperbranched polyester grafted nano-Y2O3(Y2O3-g-HBPE) on the isothermal curing behavior of epoxy resin(EP) were studied by isothermal differential scanning calorimetry(DSC), and the cure kinetics of the EP/Y2O3-g-HBPE was analyzed by Kamal equation. The results show that the curing mechanism of EP and EP/Y2O3-g-HBPE contain autocatalytic mechanism. The addition of Y2O3-g-HBPE makes the curing rate constant k1、k2 and the activation energy increase.
参考文献
| [1] | Mounir El Achaby;Fatima-Ezzahra Arrakhiz;Sebastien Vaudreuil .Mechanical, Thermal, and Rheological Properties of Graphene-Based Polypropylene Nanocomposites Prepared by Melt Mixing[J].Polymer Composites,2012(5):733-744. |
| [2] | Benalia Kouini;Aicha Serier .Properties of polypropylene/polyamide nanocomposites prepared by melt processing with a PP-g-MAH compatibilizer[J].Materials & design,2012(Feb.):313-318. |
| [3] | Tao, P.;Li, Y.;Siegel, R.W.;Schadler, L.S. .Transparent dispensible high-refractive index ZrO_2/epoxy nanocomposites for LED encapsulation[J].Journal of Applied Polymer Science,2013(5):3785-3793. |
| [4] | 周宏,朱君,孙雪丹,郭亚男,张玉霞,陈龙.环氧树脂/BN纳米复合材料的制备及性能研究[J].绝缘材料,2012(04):5-8. |
| [5] | 班建峰,庞起,梁春杰,覃利琴,韦庆敏.超支化液晶/Al2O3/环氧树脂复合材料电性能研究[J].热固性树脂,2012(04):47-50. |
| [6] | 张新荔,张伟娜,刘晶,陈耀容.超支化聚酯在环氧树脂改性中的应用[J].化学与黏合,2010(03):51-56,60. |
| [7] | 周红军,容敏智,邓小安,陈明芳.环氧树脂/改性纳米Y2O3复合材料的固化动力学[J].广州化工,2014(01):56-58. |
| [8] | Sourour S;Kamal M R .Differential Scanning Calorimetry of Epoxy Cure:Isothermal Cure Kinetics[J].Thermochimica Acta,1976,14(1-2):41-59. |
| [9] | 杨超,江学良,孙康.酸酐固化环氧树脂/蒙脱土复合材料的等温固化动力学[J].物理化学学报,2005(06):681-685. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%