利用DZ-4000(Ⅲ)型电火花沉积/堆焊机,以WC为电极材料,采用氩气为保护气对H13钢基体进行了电火花表面强化.利用扫描电镜、能谱分析仪、X射线衍射仪和显微硬度计等对沉积层的成分、组织、硬度和表面粗糙度进行了研究.结果表明,利用电火花沉积工艺可获得组织均匀、致密,且与基体呈冶金结合的沉积层,沉积层平均厚度约60μm.沉积层主要由Fe3W3C、(CrFe)7C3和W2C等相组成.沉积层的平均显微硬度为1321.4 HV0.05,约为基体硬度的3倍.
参考文献
| [1] | 黄小鸥,汪瑞军,徐林.电火花沉积金属陶瓷材料耐铝液热浸蚀研究[J].焊接,2001(03):22-24. |
| [2] | CHEN Zheng;ZHOU Y .Surface modification of resistance welding electrode by electro-spark deposited composite coatings:Part Ⅰ.Coating characterization[J].Surface and Coatings Technology,2006,201:1503-1510. |
| [3] | R.J. Wang;Y.Y. Qian;J. Liu .Structural and interfacial analysis of WC92-Co8 coating deposited on titanium alloy by electrospark deposition[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2004(1/4):405-409. |
| [4] | Li X;Sun D Q;Zheng X Y et al.Microstructures and wear properties of TiN-based cermet coating deposited on 1Cr18Ni9Ti stainless steel by electrospark process[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2008,490(1-2):1-5. |
| [5] | 于华,潘清华,李兆楠,林耀华,聂书才,杨豫川.35CrMo钢表面电火花沉积WC合金涂层的界面行为[J].材料热处理学报,2010(10):96-99. |
| [6] | 王建升,孟惠民,张瑞珠,严大考.铸钢轧辊电火花沉积WC-4Co涂层组织和性能分析[J].焊接学报,2010(10):43-46. |
| [7] | ZHANG Kun,何业东,WANG De-ren.电火花沉积MCrAlY涂层及其高温氧化行为[J].材料热处理学报,2008(04):143-147. |
| [8] | 罗成,董仕节,熊翔,罗平.Cr12MoV钢表面电火花沉积TiB2涂层特性研究[J].模具工业,2009(03):63-67. |
| [9] | Zamulaeva EI;Levashov EA;Kudryashov AE;Vakaev PV;Petrzhik MI .Electrospark coatings deposited onto an Armco iron substrate with nano- and microstructured WC-Co electrodes: Deposition process, structure, and properties[J].Surface & Coatings Technology,2008(15):3715-3722. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%